699578
8
Zoom out
Zoom in
Previous page
1/40
Next page
6 Programming CA-6
EXAMPLE:
changing the service code from 12345 to 78901
[12345] [#] - enter the service mode
[1] [#] - call the service function 1
[78901] [#] - enter the new code and confirm it; the function will be automatically exited
FS2 - programming control panel password (HEX)
FS3 - programming computer password (HEX)
In the DOWNLOADING mode (see: Installer Manual), the control panel, having
established connection with the computer, sends a six-character panel password and
waits for the password (identifier) of the answering computer. When the appropriate
identifier is received, the transmission to computer can begin. On receiving an identifier
other than that programmed with this function, the control panel will hang up. The
control panel will accept no command from the computer, unless the computer identifier is
valid.
Programming of this identifiers consists in entering three pairs of hexadecimal characters
(digits from 0 to 9 and characters A, B, C, D, E, F - see the table of codes), in the following
order: [first][second][#], [third][fourth][#], [fifth][sixth][#]. The LEDs at first display previous
settings, and, after the change – the values of entered characters (binary, the first
character - LEDs 1 to 4, the second – LEDs 5 to 8, number of programmed characters
pairs - LEDs AB, AB). Having entered the last pair of characters, the panel automatically
exits the function.
EXAMPLE:
programming the identifier 23C4D5
[12345] [#] - enter service mode
[2] [#] - call the required function
[2][3] [#] - enter the two first characters
[
*
2][4] [#] - enter the two next characters
[
*
3][5] [#] - enter the two last characters; after acknowledging them the panel will automatically exit
the function
The factory identifiers can be restored with function FS109.
FS4 - programming computer telephone number (HEX)
The computer telephone number is necessary for initiating communication from the control
panel keypad (user function “0”). When communication is initiated from the computer, the
panel, after the communication passwords exchange, hangs up and calls back the
computer. If the computer telephone number is not programmed, it is possible to initialize
the communication from the computer in a simplified way - the control panel will not hang
up and call back.
The telephone number can consist up to sixteen digits and special characters. The special
characters are used to control the dialing process. Telephone number is programmed by
entering the consecutive digits and characters in pairs. Each pair is to be confirmed by the
[#] key (see the example below). The LEDs AB, AB show (binary) which pair of characters
is being programmed, and the LEDs 1-4 and 5-8 show (also binary) the values of
programmed digits.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info