699578
7
Zoom out
Zoom in
Previous page
1/40
Next page
CA-6 SATEL 5
panel will signal exiting the function with four short and one long beeps. The [
*
] key makes it
possible to quit the function at any time without saving the changes in currently displayed
data.
Make sure that the entered data are correct, because the control panel does not verify
the input parameters and programming any wrong settings may result in malfunction
of the panel.
HEX functions
During programming the LEDs 1-4 show the first hexadecimal digit, LEDs 5-8 - the second
digit, while the LEDs AB, AB display the counter of digit pairs. The programming consists in
entering a two hexadecimal digit number and confirming it with the [#] key.
If you want to enter the 0-9 digits press the corresponding key, the A-F digits are entered
using the combination of keys [
*
] and [0]...[5] (i.e. A=[
*
][0], B=[
*
][1], and so on). Pressing the
[
*
] key results in blinking of the digit, which will be changed after one of the keys [0]...[5] is
pressed.
The [
*
][#] combination of keys makes it possible to exit the function without saving changes.
Fig.1. The way of LED indication in keypad
Note: Both in the decimal and hexadecimal function, consecutive pressing of numeric keys
result only in displaying the respective number on the LEDs (the state of LEDs 1-4
and 5-8 is alternately changed). Only by pressing the [#] key you will save the status
of the parameter displayed on the diodes.
The character encoding table can be found at the end of this Manual.
Description of the panel service functions
Next to the some functions in brackets is given an information on entering data: bit (BIT),
decimal (DEC) or hexadecimal (HEX). If the function description contains no detailed
information on programming, the data are entered in the panel as described in the previous
section for the specific type of function.
FS0 - quitting service mode
The [0][#] combination of keys ends the service mode. The control panel starts functioning
in accordance with the new settings. Exiting the service mode is signaled in all partitions
with four short and one long beeps.
Functions programming basic parameters
FS1 - programming service access code
The service code enables activation of the service mode. It can be from 4 to 6 digits long.
1. digit
2. digit
counter
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info