699607
18
Zoom out
Zoom in
Previous page
1/24
Next page
U
SER
M
ANUAL
CA-5
16
6.6 A
RM
S
ILENT
[CODE][
*
][5][#]
In the silent armed mode, the alarms are not signaled on the OUT1 output and on the output
programmed as
BURGLARY ALARM
. They are only signaled in the keypad and by sending
a message to the monitoring station.
EXAMPLE: activating the silent armed mode (user code = 1230).
[1][2][3][0][
*
] calling the "user function" mode, confirmed with three short beeps and in the LED
keypad additionally slow blinking of the [PROGRAM] LED,
[5] [#] activating the silent armed mode – four short beeps and a long one signal the end of
the function (in the LCD keypad this function may be called using arrow keys).
Note: If a zone with activated P
RIORITY
option is violated or tampered, than the control panel
will refuse to perform this function.
6.7 S
ET TIME
[CODE][
*
][6][#]
The function permits setting the control panel clock (day, month, hour). Present year is set by
the installer with the service function. The real indications of time and date ensure correct
interpretation of the events recorded in the panel memory log. The history of events may be
downloaded by means of the LCD keypad or the computer and its program managing the
CA-5 alarm control panel.
The programming procedure is as follows:
- HOURS, MINUTES – acknowledge ([H][H][M][M][#]),
- MONTH, DAY – acknowledge ([M][M][D][D][#]),
The hour should be given in the 24-hour format (with "zero" before the hour less than 10).
It is possible to leave the function earlier after programming the time (the date will remain
unchanged) by pressing the ([#]) key twice.
Note: In order to reset the „Clock loss” trouble signal, the time and date must be
programmed.
EXAMPLE: programming time: 7:45
and date: 25 July. (user access code = 1230)
[1][2][3][0][
*
] calling the "user function" mode, confirmed
with three short beeps and in the LED
keypad additionally with slow blinking of the
[PROGRAM] LED,
[6] [#] – calling the “set time” function confirmed with
two short beeps and in the LED keypad
additionally with fast blinking of the
[PROGRAM] LED (in the LCD keypad
this function may be called using arrow
keys),
[0][7][4][5][#] entering the hours and minutes confirmed
with two short beeps,
[0][7][2][5][#] entering the month and day confirmed with
four short beeps and a long one, quitting the function.
The LCD keypad display present time, but in the LED keypad it is possible to check the
current hour and date set in the control panel. In order to check the settings, call the user
function 6 and pressing the [
*
] key twice look through the digits displayed on the LEDs (from
2 to 5) as they were programmed. The first digit is displayed immediately on calling the
function.
Time (hh:mm):
07:45
Date (mm.dd):
07.25
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info