699607
17
Zoom out
Zoom in
Previous page
1/24
Next page
CA-5 SATEL
15
EXAMPLE: deleting the third and fifth user's access codes (Master user code = 7890).
[7][8][9][0][
*
] calling the "user function" mode, confirmed with three short beeps and in the LED
keypad additionally slow blinking of the [PROGRAM] LED,
[3] [#] calling the "erase user" function, confirmed with two short beeps, and in the LED
keypad additionally with lighting up of LEDs with the numbers of existing codes (e.g.
1,2,3,4,5) and with fast blinking of the [PROGRAM] LED (in the LCD keypad this
function may be called using arrow keys),
[3][5] indicating the numbers of deleted access
codes – confirmed in the LED keypad by
extinguishing of the LEDs with numbers 3
and 5 (the LEDs 1, 2 and 4 are still lit up),
and in the LCD keypad by disappearing of
digits 3 and 5 from the display (digits 1, 2
and 4 are still on),
[#] – deleting the selected access codes; four short beeps and a long one signal end of the
function.
6.5 B
YPASS ZONES
[CODE][
*
][4][#]
The function enables bypassing of the zones in order to arm a part of the system or to
bypass malfunctioning detectors in the armed mode.
After calling the function, press the keys with numbers corresponding to the numbers of
zones to be bypassed (the LEDs or digits corresponding to the selected zones will on) and
confirm the selection with the [#] key.
After bypassing the zones and quitting the user function mode in the LED keypad, the
corresponding LEDs start slowly blinking, in the LCD keypad letters “b” will appear on the display
in the fields corresponding to the bypassed zones. The zones will remain bypassed until the next
disarming or their manual unbypassing with the same function. The unbypassing consists in
extinguishing the LEDs (digits) which correspond to the bypassed zones.
Bypassing/unbypassing a zone generates an event saved in the control panel memory.
Upon arming, the indication of bypassed zones is switched off.
Bypassing the Arm/Disarm type zones makes impossible the remote arming/disarming of the
system, as well as the alarm clearing. This operation must then be performed by entering the
access code from the keypad.
EXAMPLE: bypassing the zones 3 and 4 (user access
code = 12321).
[1][2][3][2][1] [
*
] calling the "user function"
mode, confirmed with three short beeps and
in the LED keypad additionally with slow
blinking of the [PROGRAM] LED,
[4] [#] calling the "bypass zones" function,
confirmed with two short beeps (in the LCD
keypad this function may be called using
arrow keys),
[3][4] selecting the numbers of zones to be
bypassed – in the LED keypad the LEDs 3
and 4 will light up, in the LCD keypad digit 3
and 4 will be displayed,
[#] accepting the entered data – four short beeps and a long one signal end of the
function.
Note: The 24h zones (which are on duty, whether the system is armed or not) can only be
bypassed by means of the zone bypassing function, accessible on entering the service
code which ends with [
*
].
Whom to leave?
12
.
4
.
What to bypass?
..
34
.
8 Jul, 12:23:40
..
bb
.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info