699607
8
Zoom out
Zoom in
Previous page
1/24
Next page
U
SER
M
ANUAL
CA-5
6
4.4 E
VENTS SIGNALED ON THE
OUT1
OUTPUT
The installer may activate the signaling of arming/disarming and alarm clearing on the OUT1
output. If this output controls the siren operation, it will generate short sounds (in much the
same way as in the car alarm systems). The signals have the following meanings :
one short sound – arming,
two short sounds – disarming,
four short sounds – clearing the alarm or disarming and clearing the alarm.
Additionally, the OUT1 output signals the typical situations for the security system:
continuous signalburglary alarm,
intermittent signal 1s/1s – fire alarm.
The installer may select the identical manner of signaling for the fire alarm and for the
burglary alarm (i.e. the continuous signal), he can also, with the use of a corresponding
service function, disable the OUT1 output signaling of arming/disarming from the keypad.
4.5 U
SER ACCESS CODES
For everyday operation of the system it is necessary to know the user access code (the
access code is a sequence of 4 to 8 digits within the range of 0–9).
To enter the access code in the control panel, press the corresponding keys on the keypad in
the order of the code digits and finish the full sequence by pressing the [#] or [
*
] keys (as may
be required). The control panel comes with the following factory settings:
master user access code: 1234;
service code: 12345.
By using the master user code you can program 5 additional user access codes, or to
delete them if they were programmed before.
The installer can assign specific authority levels to some of the access codes to distinguish
them from the other user codes:
Access code No. 4 – action under duress (disarming or alarm clearing by means of this
code results in sending a special code to the monitoring station, and activating the D
URESS
ALARM
output)
access code cannot be changed with the user function 1;
the code does not reset activity of the D
URESS ALARM
output.
Access code No. 5 - does not disarm for other users – permits disarming only when the
same access code was used for arming the system, which makes it possible to control
(block) access to the site for the user who has such an access code at his disposal.
The installer has access to some of the user functions (service code ending with [
*
]).
However, the service code cannot arm and/or disarm the system, set the service access time
and add or delete the users.
4.6 A
RMED
M
ODE OF THE
C
ONTROL
P
ANEL
In order to adjust the security system to various situations, the CA-5 control panel offers
several armed modes:
4.6.1 Full armed mode
The operating mode when detectors connected to the control panel control the
protected site and violation of the protected areas is signaled by the control panel with
any available means (monitoring, sirens, keypad).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info