699607
7
Zoom out
Zoom in
Previous page
1/24
Next page
CA-5 SATEL
5
Some of the LED indicators are only installed in the LED type keypads, their functions in
the LCD keypads being taken over by the display.
4.2 S
TATUS OF CONTROL PANEL ARMED ZONES IN
LCD
KEYPAD
The first five characters (counting from the left) in the LCD display lower line indicate the
state of detectors attached to the control panel armed zones. Stated below are the symbols
which may be displayed there, as well as their respective meanings:
the zone is free (not violated)
¦ the zone is violated
2EOL zone tamper violated
a the zone caused an alarm condition (alarm memory)
A the zone has been violated or caused alarm as the first one (counting from the
moment of ending the exit delay countdown after arming – see notes in the section
on LED
FUNCTIONS
)
s zone triggered the tamper alarm (memory of 2EOL zone tamper alarm)
S tamper alarm caused as the first one (for 2EOL zone)
b the zone is bypassed
4.3 C
ONDITIONS SIGNALED ACOUSTICALLY IN THE KEYPAD
The beeps generated to confirm the operation on the keypad:
one short – confirmation of pressing a key; activation of the review function in the keypad
(HOLD DOWN: 5, 6, 7)
three short – confirmation of entering the mode of user functions programming;
deactivation of the chime signaling in the keypad (key 8), reset of the D
URESS ALARM
output
activity,
one long (lasting approx. 1.5s) – an attempt to arm the system when the control panel is
not ready (there are violated or tampered zones with the “
PRIORITY
option activated – see
„Arming”), a refusal to enter the function,
two long – a wrong access code, canceling a function or incorrect data for a function,
three long – the code is recognized but because of some reasons the calling function is
not available or it can not be perform at the moment (e.g. in case of the attempt to view
a troubles memory when system is armed),
four short, one long – arming/disarming, entering the service mode, successful
completion of function programming, activating the chime signaling in the keypad.
six short – partial arming (there are some zones bypassed).
System events signaling:
continuous beep – alarm,
intermittent beep – fire alarm,
one short beep every 3 seconds – service mode (with the
[PROGRAMMING] LED on),
one long beep every 3 seconds – indicates exit delay time countdown,
two short beeps every 1.5 seconds. – indicates entry delay time countdown,
five short beeps – violation of the "CHIME" type zone.
Which events are to be signaled acoustically should be determined by the installer.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info