699607
14
Zoom out
Zoom in
Previous page
1/27
Next page
Installer Manual CA-5
12
Connect the wire of the electric shock protection circuit to the terminal block provided next
to the transformer and marked with the ground symbol . This circuit should also be
connected to the control panel protective terminal.
STARTING PROCEDURES FOR THE CONTROL PANEL POWER SUPPLY.
1. Connect the emergency power supply wires to the corresponding battery terminals
(the red one to the battery plus, the black one to the minus). The control panel will not
start on connecting the battery alone (without the mains power connected), however,
it will keep on working in case of the ~230 V AC voltage trouble, provided it was started
before.
2. Switch on the ~230 V AC mains supply – the control panel gets started.
Connection of the power supplies in the prescribed order will permit correct functioning of the
power supply unit and the control panel electronic safety devices, thus avoiding damage to
the security system elements caused by possible installation faults.
IMPORTANT:
Never switch on the control panel power supply until all the remaining connections are
completed.
If it is necessary to completely disconnect the control panel power supply, the 230 V
alternating voltage should be disconnected first, then the battery. Re-connection of the
power supply is to be performed in the above mentioned order (the battery first, then the
230 V alternating voltage).
As the control panel has no isolating switch to disconnect the mains supply,
it is important that the owner or the user of the security system be informed on
how the system is to be disconnected from the mains (e.g. by indicating the fuse
which protects the control panel supply circuit).
4.3 C
ONNECTION OF KEYPAD
The CA-5 control panel interfaces with SATEL made LED and LCD type keypads.
Note: The control panel in version 2.10 supports LCD keypads in program version 1.08
or later, and CA-5 KLED-S keypads in version 1.1 or later.
The keypad should be connected to the system with a four-wire line, using the COM, KPD,
DTA, CLK connectors on the control panel. It is recommended to use an untwisted
unshielded cable 8x0.5 mm
2
(do not use twisted pair). Where this cable is used, the cable
length can be up to 200 m.
Distance Lead No. of cores
to 100 m
Supply and common ground
CLK and DTA signals
2 x 1
2 x 1
from 100 m
to 200 m
Supply and common ground
CLK and DTA signals
2 x 2
2 x 1
Provision is made for connecting additional keypads (in parallel to the others). Each
keypad should be connected to the control panel by means of a separate cable. If this is the
case, activation of the programming mode (service or user one) from any keypad will block
the operation of the other keypads.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 User Manual - English - 24 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info