699577
16
Zoom out
Zoom in
Previous page
1/60
Next page
14 Programming SATEL
In the LED keypad programming of this code consists in entering three pairs of hexadecimal
characters (digits from 0 to 9 and characters A, B, C, D, E, F - see the table of codes). The
LEDs will first display previous settings, and, after the change - the values of characters
entered (binary, the first character - LEDs 1 to 4, the second - LEDs 5 to 8, number of pair of
programmed characters - LEDs 9-12). When the last pair of characters has been entered
and acknowledged, the control panel will automatically quit the function.
EXAMPLE (for the LED keypad):
programming the identifier 23C4D5
[2] [#] - call the required function.
[2][3] [#] - enter the two first characters
[
*
2][4] [#] - enter the two next characters
[
*
3][5] [#] - enter the two last characters; after acknowledging them the panel will automatically exit the
function
FS4 - programming computer telephone number (HEX)
The computer telephone number is necessary so that the control panel can call the
computer. If the computer telephone number is not programmed, the computer
initiated communication can be established in a simplified way - the control panel will
not hang up and call back.
The length of a telephone number can be up to sixteen digits and special characters. The
special characters are used to control the dialing process. In the LED keypad it is
programmed by entering the consecutive digits and characters in pairs. Each pair is to be
confirmed by the [#] key (see the example below). The LEDs 9-12 show (in binary form)
which pair of characters is being programmed, and the LEDs 1-4 and 5-8 show (also in
binary form) the values of programmed digits.
EXAMPLE: programming the number 0 - 556 40 31 (0D 55 64 03 1AA)
[4] [#] - call the required function
[0][
*
3] [#] - enter the two first characters
[5][5] [#] - enter the two next characters
[6][4] [#] - enter the two next characters
[0][3] [#] - enter the two next characters
[1][
*
0] [#] - enter the next character and the part of special code AA (telephone number end)
[
*
0] [#] - enter the second part of special code AA (telephone number end)
[
*
] [#] - exit the function after entering 11 characters.
The following codes has been assigned to the functions mentioned below:
A(
HEX
) - control character (combination [
*
][0])
B(
HEX
) - switch to pulse dialing (combination [
*
][1])
C(
HEX
) - switch to tone dialing (combination [
*
][2])
D(
HEX
) - wait for dialing tone (combination [
*
][3])
E(
HEX
) - short pause (3 seconds) (combination [
*
][4])
F(
HEX
) - long pause (10 seconds) (combination [
*
][5])
¾
(
HEX
) - signal
¾
in DTMF system (combination A[0])
#(
HEX
) - signal # in DTMF system (combination A[1])
a(
HEX
) - signal a in DTMF system (combination A[2])
b(
HEX
) - signal b in DTMF system (combination A[3])
c(
HEX
) - signal c in DTMF system (combination A[4])
d(
HEX
) - signal d in DTMF system (combination A[5])
Notes:
Do not program the control characters B, C and D before the telephone number (these
are set in the FS5 options).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info