699577
7
Zoom out
Zoom in
Previous page
1/60
Next page
Introduction
Design and program flexibility of the CA-10 control panel give the installer a full freedom of
choice in defining the alarm system functions and operating mode. Additionally, they allow
some extra functions to be assigned to the panel (for example, control of lighting , locks,
cameras).
All the control panel parameters can be programmed by means of the keypad or PC computer
(locally via RS-232 or remotely via the modem). Programming with the keypad is possible
after starting the service mode.
Service Mode [SERVICE CODE][#] or [SERVICE CODE][
*
]
The service mode can be started from the keypad in any disarmed and non-alarming partition.
In order to start the service mode, enter the service code (by default=[1][2][3][4][5]) and confirm
it with the key [#] or [
*
]. The service mode is indicated by alternate blinking of the
[
ALARM
]
and
[
ARMED
]
LED corresponding to the partition, where the keypad is and a short beep is
generated every 3 seconds. The other partitions function normally, alarms being only signaled
in the keypads and reported to the monitoring station. No keypad tamper conditions or
addresses are checked in the service mode. The service mode is on until deactivated by the
service function (FS0). It can also be exited with a computer command from the DLOAD
program.
Calling the control panel service functions
Calling in the service function is signaled by lighting of the TROUBLE LED. Depending on the
keypad type (LED or LCD), the service functions can be started in various ways.
Calling the service functions in LED keypads
Having started the service mode, call the function by entering the function number from the
keypad and pressing the key [#].
Calling the service functions in LCD keypads
Having started the service mode, you can see the following message appear on the display:
You can move through the menu by means of the arrow keys. Pressing any arrow key will bring
the service mode hierarchical menu to the display, which facilitates access to the service
functions. The menu is organized so that the control panel particular service functions are
grouped by topics.
The keys ST enable the menu to be scrolled.
You can enter a submenu or start the function shown by arrow on the display either by pressing
the key X or [#].
In order to quit the submenu or the function, press the key or [
*
], or, alternatively, the key
combination [
*
] and [#]. It depends on the type of function – in some functions, the keys [
*
] and
W are used for editing.
Service menu
Menu:
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info