699577
7
Zoom out
Zoom in
Previous page
1/24
Next page
CA-10 SATEL
5
LED Functions
ALARM
(red color) – blinking LED indicates alarm in partition. The LED goes out
after alarm reset (when none of LEDs is blinking, the alarm cause will be shown
by the function "Viewing alarm log". The alarm may have been caused by
a zone not displayed in the partition, or the zone belonged also to another
partition, where alarm was cleared).
TROUBLE
(yellow color) – blinking LED indicates there is a failure in the alarm
system. With the option „keypad trouble alarm on until cleared” (FS131) active,
it is blinking until the trouble log is viewed (key 7 function) and the function is
finished by pressing the [#] key.
112
or
116
- (red color) LEDs indicating the status of system zones::
ON – zone violated,
blinking fast – alarm memory (the zone triggered alarm, but is not
violated any more),
ON with a short extinguishment every 2 seconds – detector tamper
(2EOL zone type),
flashing every 2 seconds – tamper memory (detector was tampered -
2EOL zone type),
blinking slowly – zone bypassed (indicated only with the partition
disarmed).
ARMED
I, II, III, IV (yellow color) – The blinking LED indicates that partition exit
delay countdown is in process. Additionally, when the GO TO function is used,
the rapidly blinking LED indicates the partition currently controlled by the
keypad.
Note: When the function „display service message after tamper alarm” (FS131) is
active, the
[
ALARM
] LED, on detection of a tamper, is blinking until the
message is cleared with a service code.
Functions of the LEDs change on calling the service mode or entering the user function
mode.
Some states of the control panel are additionally indicated by combinations of LEDs
[
ALARM
], [
ARMED
],
[
TROUBLE
]:
[
ALARM
], [
ARMED
],
[
TROUBLE
]
blinking - control panel signals entering the
user function
[
ALARM
], [
ARMED
],
[
TROUBLE
]
on - control panel performs function
"Viewing alarm log"
[
TROUBLE
]
blinking,
[
ALARM
] and [
ARMED
] on - control panel performs
function "Viewing trouble log"
Additional signaling, which is only provided in the CA-10 KLED-S keypad:
LED designated with the symbol is lit when the keypad audible alarm (buzzer)
is on.
all LEDs blinking simultaneously (with 0,5s/0,5s timing), along with audible
signaling, informs the user that connection between the keypad and the control
panel has been lost.
keypad illumination blinking with a high frequency - the keypad is receiving data
from the control panel.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info