699577
11
Zoom out
Zoom in
Previous page
1/43
Next page
CA-10 Installer Manual 9
Keypads
The keypads are designed for operating and programming the system (or a partition).
The CA-10 can support four independent LCD or LED keypads, thus making possible
creation of four partitions or separate systems. Each keypad is assigned to one partition.
The keypad operating mode is set when programming the panel. It is possible to disable
some of its functions (e.g. the quick arming by pressing in turn the [0] and [#] keys), and
determine what audible signals are to be provided by the keypad.
The keypads have an individual addresses, which make difficult replacement or connection of
another keypad, an individual tamper contact and two zones, which operate identically as the
zones of the control panel main board. The keypad zones can be assigned to any partition.
The data concerning the address, tamper contact status and zone status, are sent to the
control panel together with keypad data.
LED Keypad
There are two types of LED keypads available to interface with the CA-10 panel, which
have the following designations: CA-10 KLED and CA-10 KLED-S.
In LED keypads the status of partitions and zones is indicated by means of LEDs
(the CA-10 KLED keypad can display the status of up to 12 zones). Additionally, three
LEDs provide information on the system status: the red LED indicates ALARM,
the green one ARMED (blinking means countdown of the exit delay), and the yellow
one – TROUBLE.
For details regarding the keypad indication see the CA-10 User Manual.
LCD Keypad
There are three types of LCD keypads available (to interface with the CA-10 panel), which
have the following designations: CA-10 KLCD, CA-10 KLCD-L and CA-10 KLCD-S.
The CA-10 control panel in version 5.11 supports the keypads with program version v3.12
(or later).
The LCD keypad provides information on the alarm system status by means of a two-line
(2 x 16 characters) LCD display and, additionally, six LEDs. The LED functions are
described in the CA-10 User Manual.
The keypad is provided with 12 keys, designated according to the telephone standard, and
intended for entering data. The additional 4 arrow keys in the LCD keypad allow the user
to move through the MENU and to select functions.
Three operating modes of the keypad are provided:
1) Text mode. The first line of the display shows the system date and time. The second
line contains messages on the system state. The contents of messages can be either
standard (e.g. SYSTEM OK., ARMED), or customized by the installer. This mode
enables the status to be displayed either with or without priority. In the priority mode,
the most important information message from among a few relevant ones
(e.g. ALARM!) will be constantly on. In the non-priority mode, the display state will
change cyclically (e.g. the messages THERE WAS ALARM and ARMED will be
displayed alternately).
2) Zone state display LCD standard. The first line of the display shows the system
date and time, while the second serves for monitoring the state of all the 16 zones of
the control panel. The zone state is determined by a displayed character (for example:
= zone OK., = zone violated). At the moment of changing the system state (e.g.
when the system is armed), the display shows the status for a while, much in the same
way as in the previous mode, then the keypad returns to monitoring the state of zones.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info