470265
53
Zoom out
Zoom in
Previous page
1/92
Next page
53
Setting
Advanced
color matching ..... Set to ‘On‘ to activate the ‘Advanced color
matching’. When it is set to ‘Off‘, all items
except for ’Test pattern’ are displayed in
grayout and cannot be adjusted.
Measured . . . . . . . . When using the color wheel set optimized
for high brightness, the chromatic coordinate
(X,Y) and the brightness (L) of Red, Green,
Blue, Half white, and White are displayed
(Fig.1). When using the color wheel set
optimized for rich color reproduction, the
chromatic coordinate (X,Y) and the brightness
(L) of Red, Green, Blue, and White are
displayed (Fig.2).
Information: Select ‘Information’ and press the SELECT
button to display the information dialog box
(Fig.3). Measured information display can be
used to confirm the current setup condition of
the Image select menu and the color wheels.
Target . . . . . . . . . . . Adjust the chromatic coordinate (X,Y) and
the gain value (g) of Red, Green, Blue, Cyan,
Magenta, Yellow, and White. Use the Point
ed7 8 buttons to move the red frame
pointer to an item of which you want to adjust
the value and then press the SELECT button.
Use the Point ed buttons to adjust the value.
To move to the next digit, use the Point 7 8
buttons. Press the SELECT button to set the
value.
Auto test pattern ... Select ‘On‘ to display a suitable pattern when
setting items.
Factory default . . . . Select ‘Factory default’ and press the SELECT
button. Then ‘Return to factory default of
Color matching?‘ message appears. To reset
the selected Measured value and Target
value, select [Yes]. Then, the confirmation box
appears. Press the SELECT button at [Yes]
again.
Reset ............ Select ‘Reset’ and press the SELECT button.
Then the confirmation message appears.
Press the SELECT button at [Yes] to reset to
the previously stored values.
Store . . . . . . . . . . . . Select ‘Store’ and press the SELECT button.
Then the confirmation box appears. To store
adjusted data, select [Yes].
Test pattern ....... When using the color wheel set optimized for
high brightness, use the Point ed buttons to
select from (Measured) Red/Green/Blue/Half
white/White/(Target) Red/Green/Blue/ Cyan/
Magenta/Yellow/White.
When using the color wheel set optimized
for rich color reproduction, use the Point ed
buttons to select from (Measured) Red/Green/
Blue/White/(Target) Red/Green/Blue/Cyan/
Magenta/Yellow/White.
Quit . . . . . . . . . . . . .Exit the Color matching menu.
DynamicBlack
DynamicBlack
TM
improves the black level of the projector. Black
level is the darkest part of a picture and varies between viewing
devices and environments. Set DynamicBlack Off/Low/High.
Advanced color matching
Close this
dialog box.
Note:
In the Measured information dialog box, ‘Standard’
indicates all the Image select menus other than
‘Dynamic’.
Note:
DynamicBlack is fixed to ‘Off
when ‘DICOM‘ is
selected in the Image level selection (pp.39, 43).
Fig.1 For high brightness color wheel
Fig.2 For rich color reproduction color wheel
Fig.3 Measured information dialog box
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PDG-DET100L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PDG-DET100L in the language / languages: English as an attachment in your email.

The manual is 10,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PDG-DET100L

Sanyo PDG-DET100L User Manual - German - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info