470265
50
Zoom out
Zoom in
Previous page
1/92
Next page
50
Background
The selected background screen will be displayed when no
input signal is detected.
Blue . . . Blue colored background.
User . . . The image you captured.
Black. . . Black colored background.
Setting
Lamp control
This function allows you to change brightness of the screen.
2-Lamps
. .
Two lamps turn on.
Lamp1
. . .
Only Lamp1 turns on.
Lamp2
. . .
Only Lamp2 turns on.
This projector is equipped with 2 projection lamps and the
number of using lamps can be switched to 2 lamps or 1 lamp.
Using 1 lamp maintains the life of projection lamps.
Press the SELECT button at Lamp mode to display a dialog
box. Use the Point ed buttons to select "2-Lamps", "Lamp1" or
"Lamp2" and press the SELECT button. Then the confirmation
message appears. Select [Yes] and press the SELECT button.
Note:
When switching from one of lamps to the other
(e.g. when switching from Lamp1 to Lamp2), both
lamps will light until the brightness of the lamps
are stabilized.
When neither of the two lamps is lighted, the
projector will shutdown automatically.
When either of the two lamps does not light up,
the LAMP 1/2 REPLACE indicator blinks orange
and the projector will light the other automatically.
(X mark will appear on the unlighted lamp in the
Lamp Status Display. See page 65 for details.)
Lamp mode
Note:
“User” cannot be selected when the image is not
captured.
Lamp control
Select the lamp operation when the total lighting time of a
lamp exceeds the recommended total hours of use.
Mode 1 . . . A lamp can be turned on even after exceeding
the recommended total hours of use.
Mode 2 . . . A lamp is not turned on after exceeding the
recommended total hours of use.
Lamp life control
Note:
The fan noise becomes louder in Eco 2 than in
Eco 1. Select the suitable mode for the used
environment.
Note:
If Mode 2 has been selected and either of two
lamps exceeded its recommended total hours
of use, Lamp interval mode will be fixed to ‘Off.
Also, ‘2-Lamps icon in the Lamp mode and the
icon of lamp which exceeded its recommended
total hours of use will be displayed in grayout.
If Mode 2 has been selected and both lamps
exceeded the recommended total hours of use,
the warning icon will be displayed at the time of
power-on. Then the projector will turn off after 3
minutes.
Lamp interval
Note:
When either of the two lamps is out, the projector
will light the other automatically even if 'Off' is
selected.
Whe n AUTO is selected , th e pr oject or
automatically detects which lamp is used less
often than the other at the time of power-on and
lights it.
The setting values of time interval may not be
accurate, and should be used only as a guide.
This function can be used to automatically switch the lamp
that is turned on after a certain period of time in order to
reduce the lamp deterioration when 'Lamp1' or 'Lamp2' has
been selected in 'Lamp mode' setting.
Use the Point
7 8 buttons to select from (Off/Auto/24H/
200H/500H/1000H/2000H).
Normal . . . Normal brightness.
Eco 1. . . . . Lower brightness and Fan speed decrease.
Lower brightness reduces the lamp power
consumption and extends the lamp life.
Eco 2. . . . . Lower brightness and Fan speed increase.
Lower brightness reduces the lamp power
consumption and extends the lamp life. It is
recommended to use Eco 2 when using the
projector continuously over a long period of
time.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo PDG-DET100L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo PDG-DET100L in the language / languages: English as an attachment in your email.

The manual is 10,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sanyo PDG-DET100L

Sanyo PDG-DET100L User Manual - German - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info