29966
12
Zoom out
Zoom in
Previous page
1/18
Next page
MA
DC
K
5 3,6
1
2
-E11-
LISTENING TO THE TAPES
LISTENING TO PRESET STATIONS
Program stations as described in “TO PRESET STATIONS”.
Preset tuning (Remote control only)
1. Press [TUNER/BAND] to select AM or FM.
2. Press [TU PRESET] to select the desired program number.
The selected channel number appears.
The number buttons on the remote control can also be used.
Press two buttons within 2 seconds.
Preset scan tuning (Remote control only)
1. Press [TUNER/BAND] to select AM or FM.
2. Press and hold down [TU PRESET] for at least 1 second.
The preset stations are selected in sequence for approxi-
mately five seconds each.
3. Press [TU PRESET] when the desired station has been selected.
Preset scanning will stop.
Changing the reception frequencies
It is not necessary to perform this procedure in the U.S. and
Canada.
1. Select the band to be changed.
2. While pressing [ N ] on the front panel, press [TUNING -] on
the front panel for at least 1 second.
AM: 520 ~ 1710 kHz (10 kHz steps)
522 ~ 1710 kHz (9 kHz steps)
FM: 87.9 ~ 107.9 kHz (200 kHz steps)
87.5 ~ 108.0 MHz (50 kHz steps)
NOTES:
To receive an FM stereo broadcast, make sure that “MONO” is
not displayed. If “MONO” appears, press [FM MODE/REPEAT]
on the remote control to turn the “MONO” indication off. “ ST
appears when an FM stereo broadcast is received.
If the signal from an FM stereo stations is weak and reception is
poor, press [FM MODE/REPEAT] on the remote control to
change to monaural reception. (“ ST ” is replaced by “MONO” in
the display.)
v
v
v
v
1. Press [FUNCTION] to select “TAPE”.
2. Slide the cassette door backward to operate the cassette buttons.
3. Press [STOP/EJECT] to open the cassette holder.
4. Load the cassette.
After loading the cassette, press the cassette holder back into
position.
Don’t push the cassette door forward before pressing the
cassette holder down.
5. Press [PLAY] to begin playback.
6. Press [STOP/EJECT] to stop playback at any time.
When the end of the tape has been reached, automatic stop will
be activated.
TUNER
/BAND
STOP/EJECT
PLAY
A
AWM-660/US Eng page 4/16/04, 5:40 PM12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AWM660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AWM660 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info