29966
10
Zoom out
Zoom in
Previous page
1/18
Next page
-E9-
Need help? Call
1-800-813-3435
- TUNING +
- TUNING +
I
E
N
F
FM MODE
/REPEAT
IMPORTANT NOTE:
Opening the CD door while a disc is playing could scratch the
disc. Always press [ N ] and wait for the disc to stop rotating be-
fore opening the CD door.
To start play from the desired track
Select the track by using [ E ] or [ F ], then press [ I ].
Using the remote control
Press two number buttons within 2 seconds to select the track.
(Example: press [0], then [3].)
Temporarily stopping play
Press [ I ]. “ a ” blinks on the display. To resume play, press the
button again.
Skip play
Example:
To skip to track 6 while track 3 is playing, press [ E ] repeatedly
until “6” appears (in the track section) on the display. To skip back to
track 3 while track 6 is playing, press [ F ] repeatedly until “3”
appears.
The number buttons on the remote control can also be used for
skip play. To skip to track 6 while one track is playing, press [0],
then [6].
Search (forward/reverse)
If [ E ] or [ F ] is pressed during play, the player will search at
high speed in the forward or reverse direction while the button is
being pressed. When the button is released, normal play will
continue.
Repeat play (Remote control only)
Press [FM MODE/REPEAT] on the remote
control before or during play.
The player will play all the tracks or all the
programmed tracks repeatedly. “
” ap-
pears on the display.
To cancel repeat play, press [FM MODE/
REPEAT] again. “ ” disappears.
PROGRAMMED PLAY
Up to 20 tracks on a disc can be programmed for play in any order.
First, select the “CD” function and load a disc that you want to
program.
The tracks must be programmed in the stop mode.
The same track can be programmed more than once.
1. Press [MEMORY].
2. Select a track by using [ E ] or [ F ].
The number buttons on the remote control can also be used.
3. Press [MEMORY].
4. Repeat steps 2 - 3 to program additional tracks.
5. Press [ I ] to start programmed play.
When all programmed tracks have been played, the player stops
automatically. “0.00” appears on the display.
The program contents are retained in memory.
The maximum number of selections that can be programmed is
20. If you try to enter more selections, “FULL” appears on the
display.
The program contents are retained even if the function selec-
tion is changed.
To cancel programmed play, press [ N ] twice.
Checking the program
Each time [MEMORY] is pressed in the stop mode, the programmed
details sequentially appear on the display.
Changing a program
To add a new track to a program:
1. In the stop mode, press [MEMORY] repeatedly until “- -.- - - -” is
displayed.
2. Select a track as explained above.
3. Press [MEMORY].
To change a track:
1. In the stop mode, press [MEMORY] repeatedly until the selec-
tion to be replaced is displayed.
2. Select a track as explained above.
3. Press [MEMORY].
NOTE:
Programmed tracks cannot be deleted individually.
AWM-660/US Eng page 4/16/04, 5:40 PM10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AWM660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AWM660 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info