29966
11
Zoom out
Zoom in
Previous page
1/18
Next page
1
2
1
2
3
456
789
0
FM
M
O
DE
/R
EP
EAT
TUNER
1
2
FREQUENCY UP/DOWN TUNING
Automatic tuning
1. Press [FUNCTION] (or [TUNER/BAND] on the remote control)
to select AM or FM. The radio frequency appears.
or
2. Press [TUNING +] or [TUNING -] for at least 1 second to tune in
a station. The unit will scan up or down the band and receive
the next receivable station. Press the button again to continue.
The [TUNING +] or [TUNING -] on the remote control can
also be used.
Manual tuning
1. Press [FUNCTION] to select AM or FM.
2. Press [TUNING +] or [TUNING -] continuously until you are close
to the desired frequency, then press it briefly until the desired
frequency is displayed. Each time the button is pressed, the
frequency changes in 200 kHz steps for FM and 10 kHz steps
for AM.
1. Tune in the station to be preset as described above.
2. Press [MEMORY].
3. Press [TU PRESET] to select the channel number to be preset.
The number buttons on the remote control can also be used.
Two buttons must always be pressed.
Example:
To select No. 9, press [0], then [9].
To select No. 10, press [1], then [0].
4. Press [MEMORY].
If using the number buttons on the remote control, this step is
not necessary.
In this example, “103.1 MHz” FM station is preset on FM chan-
nel number 9.
NOTE:
If the next step is not taken within 10 seconds while performing
steps 2 - 4. “PROG.” disappears and the preset operation is
cancelled. Press [MEMORY] to continue.
5. Repeat the steps above to add more preset stations.
When presetting a new station, the previously preset station on
the same program number of the same band is cleared.
The preset stations will be retained in the memory even if the
unit is turned off.
If the memory contents are lost due to a power failure or other
condition, program the stations again.
- TUNING +
-E10-
LISTENING TO THE RADIO
TO PRESET STATIONS (Remote control only)
Up to 20 FM and 12 AM stations can be preset.
TUNER
/BAND
1
2
3
456
789
0
FM
M
O
D
E
/R
EPE
AT
TUNER
/BAND
2,4
3
Need help? Call
1-800-813-3435
AWM-660/US Eng page 4/16/04, 5:40 PM11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AWM660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AWM660 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info