579874

Sanitas SEM 43 Manual

20
Zoom out
Zoom in
Previous page
1/68
Next page
20
4. Unit description
Buttons:
1
ON/OFF button
2
E button (Enter)
3
Intensity setting buttons (
+/-
+/-
left,
+/-
+/-
right)
4
Keylock
5
Selection button UP and DOWN
6 M button (Menu)
Display (full screen):
1
Menu / /
2
Low battery
3
Keylock
4
Timer function (remaining time display) or
working time
5
Frequency display (Hz), pulse width (μs) or
pause time
6
Impulse intensity channel 1 ( )
7
Impulse intensity channel 2 ( )
8
Operating status display
9
Program number
Accessories:
•
2x connection cable
•
4x adhesive elec-
trodes (45 x 45 mm)
•
1x belt clip
Key functions
Every time a key is pressed,
this is acknowledged by a signal tone in order to ensure that any unintentional
pressing of a key is detected. This signal tone cannot be switched off.
ON/OFF
(1) Press briefly to switch the device on.
(2) Press once to interrupt stimulation treatment.
(3) Hold ON/OFF key
down (approx. 2 seconds) to switch off the machine.
UP and DOWN
Choice of treatment program, treatment time, frequency, pulse width, working
time and pause time.
M (Menu)
(1) Navigation between
, and menus.
(2) Return to program selection screen or menu selection.
E (Enter)
(1) Menu selection.
(2)
To confirm a selection made with
UP
/
DOWN
, apart from channel intensity.
Intensity setting buttons (
+/-
+/-
left,
+/-
+/-
right)
Setting pulse intensity.
Keylock
Locks the buttons to avoid them being pressed unintentionally.
(1) To activate the keylock, hold down the
button until the symbol is
visible in the display (approx. 3 seconds).
(2) To deactivate the keylock, hold down the
button until the symbol
disappears from the display (approx. 3 seconds).
5. Start-up
1.
Remove the belt clip from the machine, if attached.
2.
Press the battery compartment cover on the rear of the device
and slide it downwards.
3.
Insert three AAA 1.5 V alkaline batteries. Make absolutely
sure that you insert the batteries with the correct polarity as
marked.
4.
Replace the battery cover carefully (Fig. 1).
5. Reattach the belt clip, if required.
6.
Attach the connecting cable to the electrodes (Fig. 2).
The electrodes have a clip fastener to ensure easy
connection.
1
2
4
3
5
6
7
8
9
6
5
4
3
2
1
Fig. 1
Fig. 2
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sanitas-sem-43

Reset search

  • can I stick the electrodes high on my back? between the shoulder blades? or is this dangerous because it's too close to the heart? Submitted on 28-2-2020 at 09:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SEM 43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SEM 43 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info