797386
14
Zoom out
Zoom in
Previous page
1/16
Next page
13
GB
F
E
NL
D
5. Rotate the Tuning control knob to
Snooze Duration
*
<5 Minutes
>
choose the desired snooze time to
5, 10, 15 or 20 minutes. Press the Tuning control knob
to conrm the setting.
6. In order to cancel the Snooze timer while the alarm is
suspended, press the Power On / Off button.
Sleep function
Your radio can be set to turn off after a preset time has
elapsed. The sleep setting can be adjusted between 15
and 120 minutes. Ensure your radio is switched on.
1.
To set the desired sleep time, press the Menu button to
enter the menu of the current mode.
2.
Rotate the Tuning control knob until FM
<Sleep >
Set sleep time
15 minutes
“Sleep” is shown on the display.
Press the Tuning control knob to
enter the setting. The sleep
settings available are 15, 30, 45, 60, 90 or 120 minutes.
Press the Tuning control knob to confirm the setting.
The display will exit the sleep options. The sleep
symbol ‘S’ will show on the display. Your radio will
switch off after the preset sleep time has elapsed.
3.
To cancel the sleep timer and
Set sleep time
Sleep off
switch off your radio before the
chosen sleep time has elapsed, press the Power On /
Off button. To cancel the sleep timer without switching
off your radio, go back to the sleep timer settings (step
1 to 2) and select the “Sleep off” option in step 2.
4.
To view the remaining time of an active sleep timer on
the display, press the Menu button to enter the menu
of the current mode. Rotate the Tuning control knob
until “Sleep” is shown on the display and then press the
Tuning control knob.
Brightness control
The brightness of the display can be adjusted for when
the radio is in standby and for when it is in use. If you use
the unit in the bedroom, you may prefer a lower standby
brightness level than a higher brightness setting.
1. Press the Power On / Off button to switch on your
radio.
2. Press the Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to FM
<System >
select “System” and press the
Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to
System
<Backlight >
select “Backlight” and press the
Tuning control knob to enter the setting menu.
5. In Backlight menu, there are 3 Backlight
<Timeout >
Backlight
<Power On level >
Backlight
<Standby level >
settings:
Timeout: to adjust the length of
time before the backlight turns off.
Power On level: to adjust the
brightness when the radio is in use.
Standby level: to adjust the brightness when the radio
is in standby.
Rotate the Tuning control knob to select your option
and press the Tuning control knob to confirm your
setting.
Language selection
By default your radio will display all menus and messages
in English. You can choose your preferred language.
1. Press the Power On / Off button to switch on your
radio.
2. Press the Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to FM
<System >
select “System” and press the
Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to
System
<Language >
select “Language” and press the
Tuning control knob to enter the language adjustment
menu.
5. Rotate the Tuning control knob until your desired
language appears on the display. Press the Tuning
control knob to confirm your choice. The display will
change to the chosen language. The chosen language
will be marked with an asterisk.
Factory reset
If your radio fails to operate or some digits on the
display are missing or incomplete, carry out the following
procedure.
1. Press the Power On / Off button to switch on your
radio.
2. Press the Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to FM
<System >
select “System” and press the
Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to System
<Factory Reset >
select “Factory Reset” and press
the Tuning control knob to enter the setting.
5. Rotate the Tuning control knob to Factory Reset?
Yes <No>
select “Yes” or “No”. If you do not
wish to carry out a system reset, select “No” and then
press the Tuning control knob to conrm the setting.
6. With “Yes” selected, press the
Factory Reset?
<Yes> No
Tuning control knob. A full reset will
be performed. All presets and station lists will be
erased. All settings will be set to their default values.
After a system reset, the radio will be restarted.
The display will show “Welcome to Digital Radio” and
a scan of the DAB band III will be performed. In case
of malfunction due to electrostatic discharge, reset
the product (reconnection of power source may be
required) to resume normal operation.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U5DBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U5DBT in the language / languages: English as an attachment in your email.

The manual is 6.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U5DBT

Sangean U5DBT User Manual - German - 17 pages

Sangean U5DBT User Manual - Dutch - 17 pages

Sangean U5DBT User Manual - French - 18 pages

Sangean U5DBT User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info