797386
12
Zoom out
Zoom in
Previous page
1/16
Next page
11
GB
F
E
NL
D
setting. The selected format is used in standby mode
and on the playing mode screen. If the 12 hour clock
format is chosen, the radio will then use the 12 hour
clock with an AM or PM indicator.
Setting the date format
1. Press the Power On / Off button to turn on the radio.
2. Press the Menu button to access FM
<System >
the menu for the current mode.
Rotate the Tuning control knob to
select “System” and press the Tuning control knob to
enter the system settings menu.
3. Rotate the Tuning control knob to System
<Time >
select “Time” and press the Tuning
control knob to enter the setting.
4. Rotate the Tuning control knob to Time
<Set date format >
select “Set date format” and press
the Tuning control knob to enter the setting.
5. Rotate the Tuning control knob to Set date format*
<DD-MM-YYYY >
Set date format
<MM-DD-YYYY >
select “DD-MM-YYYY” or “MM-DD-
YYYY” date format and press the
Tuning control knob to conrm the
setting.
Automatically updating the clock
Your radio will normally update the clock automatically
using the DAB or FM signal. If no signal is available, then
you need to set the time manually. After a power failure
the radio will then set its clock the next time that you turn
on the radio in DAB or FM mode. Alternatively you may
specify that the time is not automatically updated. In this
case the clock must always be set manually after a power
interruption.
1. With your radio switched on, press the Menu button to
access the menu for the current mode.
2. Rotate the Tuning control knob to FM
<System >
select “System” and press the
Tuning control knob to enter the system settings menu.
3. Rotate the Tuning control knob to System
<Time >
select “Time”. Press the Tuning
control knob to enter the time setting menu.
4. Rotate the Tuning control knob to Time
<Auto update >
select “Auto update” and press the
Tuning control knob to enter the setting.
5. Rotate the Tuning control knob to
Auto update
<Update from DAB >
Auto update
<Update from FM >
Auto update
<No update >
Auto update *
<Update from Any >
choose an update option from
“Update from Any” “Update from
DAB” “Update from FM” or “No
update” as required. Press the
Tuning control knob to conrm your
choice.
NOTE
If you select “Update from Any”, “Update from DAB”,
“Update from FM” the current time received will be
displayed. If no signal is found you should either position
the radio or its aerial so that a signal can be received, or
revert to manual clock mode.
Setting the clock manually
1. With your radio switched on, press the Menu button to
access the menu for the current mode.
2. Rotate the Tuning control knob to FM
<System >
select “System” and press the
Tuning control knob to enter the
system settings menu.
3. Rotate the Tuning control knob to System
<Time >
select “Time”. Press the Tuning
control knob to enter the time setting menu.
4. Rotate the Tuning control knob to
Time
<Set Time/Date >
Set Time
2:36 PM
select “Set Time / Date” and press
the Tuning control knob to enter
the setting. The hour digits will
flash on the display. Rotate the
Tuning control knob to set the desired hour.
5. Press the Tuning control knob. The
Time
<Set Time/Date >
Set Time
2:36 PM
minute digits will flash on the
display. Rotate the Tuning control
knob to set the desired minute.
NOTE
If the radio has been set to use a 12 hour format,
there will be an option here for setting AM or PM for
the clock time. Rotate the Tuning control knob to
select AM or PM. Press the Tuning control knob to
conrm the setting.
6. If the radio has been set to usea Set date
21-9-2016
Time
Saved
DD-MM-YYYY date format (for
example). The day will ash on the
display.
Rotate the Tuning control knob to
change the day as needed.
7. Press the Tuning control knob. The Set date
21-9-2016
Time
Saved
month will flash on the display.
Rotate the Tuning control knob to
set the current month.
8. Press the Tuning control knob. The Set date
21-9-2016
Time
Saved
year will flash on the display.
Rotate the Tuning control knob to
set the current year. Then press
the Tuning control knob to conrm
the setting. The display will show “Time Saved”.
NOTE
If the radio has been set to use a MM-DD-YYYY date
format, follow the steps above to set the month / day
/ year setting.
Setting the alarm clock
Your radio has two separate alarms which can be set
to wake you to either the radio or a buzzer alarm. In
the event of a power interruption your radio has built in
memory that will retain your alarm settings. Ensure that
the time is set correctly before setting the alarms.
NOTE
When using batteries only and the radio is switched off,
the alarms can’t be set and activated.
NOTE
If no buttons are pressed for 10 seconds, the radio will
exit the alarm setup.
1.
Press and release the Alarm 1 Alarm 1:Setting
Off
button, for example. “Alarm 1:
Setting” will show on the display.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U5DBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U5DBT in the language / languages: English as an attachment in your email.

The manual is 6.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U5DBT

Sangean U5DBT User Manual - German - 17 pages

Sangean U5DBT User Manual - Dutch - 17 pages

Sangean U5DBT User Manual - French - 18 pages

Sangean U5DBT User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info