797386
13
Zoom out
Zoom in
Previous page
1/16
Next page
12
GB
F
E
NL
D
NOTE
If the time is not set before setting the alarms, “Time
is not set” will show on the display. Then Use the
Tuning control knob to set the time and date. When
the setting is complete, proceed to step 2.
2.
Press the Tuning control knob to Alarm 1:Setting
On
enter the alarm setting. Alarm
status will ash on the display.
Rotate the Tuning control knob to select “On” or “Off”.
If “Off” is selected any current setting for that alarm
will be cancelled. With “On” selected, press the Tuning
control knob to cause the alarm hour digits to ash on
the display.
3.
Rotate the Tuning control knob to Alarm 1:Time
10:00
choose the desired hour for the
alarm and then press the Tuning
control knob to cause the alarm minute digits to ash
on the display.
4.
Rotate the Tuning control knob to Alarm 1:Time
10:00
choose the desired minute for the
alarm and then press the Tuning
control knob.
NOTE
If the radio has been set to the 12 hour clock format,
there will also be an option here for setting AM or PM
for t he alarm time. Rotate the Tuning control knob
to select AM or PM. Press the Tuning control knob to
conrm the setting.
5.
Rotate the Tuning control knob to
Alarm 1:Mode
Buzzer
Alarm 1:Mode
FM
Alarm 1:Mode
Last listened
Alarm 1:Mode
1: 87.50MHz
choose the desired source for the
alarm (DAB, FM, Buzzer).
Press the Tuning control knob
when the desired source alarm is
highlighted on the display. If setting
alarm to Buzzer proceed to step 6.
For which ever radio mode is
selected, the radio alarm may be
set to any of the stations which have been stored as
presets or to the station last listened to. If setting the
alarm to a radio option, rotate the Tuning control knob
to choose either last listened or from presets 1-5.
NOTE
You can only set the alarm to use a preset which has
already been stored.
Press the Tuning control knob to conrm the selection.
The alarm day option will ash on the display.
6. Your alarm can be set to sound Alarm 1:Day
Once
once, daily, weekdays and
weekends.
Once - Will sound at one time only.
Daily - Will sound every day.
Weekdays - Will sound only on weekdays.
Weekends - Will sound only on weekends.
Rotate the Tuning control knob to choose the day
option and then press the Tuning control knob to
conrm the setting.
If setting alarms to daily, weekdays or weekends
proceed to point 10. If selecting the alarm to once
you will need to set the day, month and year options
as described below.
7. Rotate the Tuning control knob to
Alarm 1:Date
17- 5-2018
select the correct day and then
press the Tuning control knob to
conrm the setting.
8. Rotate the Tuning control knob to Alarm 1:Date
17- 5-2018
select the correct month and then
press the Tuning control knob to
conrm the setting.
9. Rotate the Tuning control knob to
Alarm 1:Date
17- 5-2018
select the correct year and then
press the Tuning control knob to
conrm the setting.
10. Rotate the Tuning control knob to Alarm 1:Volume
6
Alarm 1
Saved
10:06
A
17-5-2018
choose the desired volume and
press the Tuning control knob to
confirm the setting. Your radio
will show “Alarm 1 Saved” and
will exit the alarm setting
procedure. Active alarms are
indicated in the display by the alarm “A” symbol.
NOTE
You can also press and hold the Alarm 1 button or
Alarm 2 button to activate or disable the alarms.
When the alarm sounds
The alarm will sound at the selected times for up to 60
minutes unless cancelled. The maximum volume used
for the alarm will be specified during the alarm setting
procedure. When your radio is set to wake by the radio
alarm, your radio will switch to the selected radio station. If
the radio cannot connect to the specied the radio station,
the buzzer will be used instead.
To cancel a sounding alarm, press the Power On / Off
button to cancel a sounding alarm.
If the radio is switched on because of a radio alarm you
can control basic functions such as the volume control.
When the alarm activates it will start softly and
gradually increase in level. The radio will automatically
switch back to standby mode when the 60 minutes
have elapsed.
NOTE
Snooze timer
1. When the radio alarm sounds, pressing any button
other than the Volume control will silence the alarm
for the selected number of minutes. When the buzzer
alarm sounds, press any button. This will silence the
alarm for the selected number of minutes. The Snooze
time can be adjusted between 5 and 20 minutes in 5
minute increments. Default setting is 5 minutes.
2. The snooze duration can only be set while the radio is
playing. To adjust the silence time for the snooze timer,
press the Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to FM
<System >
select “System” and press the
Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob until System
<Snooze Duration >
'Snooze Duration' is shown on the
display. Press the Tuning control knob to enter the setting.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U5DBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U5DBT in the language / languages: English as an attachment in your email.

The manual is 6.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U5DBT

Sangean U5DBT User Manual - German - 17 pages

Sangean U5DBT User Manual - Dutch - 17 pages

Sangean U5DBT User Manual - French - 18 pages

Sangean U5DBT User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info