797386
8
Zoom out
Zoom in
Previous page
1/16
Next page
07
GB
F
E
NL
D
in a downwards direction and stop automatically when
it finds a station of sufficient strength. After a few
seconds the display will update. The display will show
the frequency of the signal found. If the signal is strong
enough and there is RDS data present then the radio
will display the station name.
4. When the waveband end is reached, your radio will
recommence tuning from the opposite waveband end.
5. Adjust the Volume control to the required setting.
6. To switch off your radio, press the Power On / Off
button.
Manual tuning – FM
1. Press the Power On / Off button to switch on your radio.
2. Press the Source button to select FM waveband.
3. Rotate the Tuning control knob to tune to a station. The
frequency will change in steps of 50 kHz. When the
waveband end is reached, the radio will recommence
tuning from the opposite waveband end.
4. Adjust the Volume control to the required setting. To
switch off your radio, press the Power On / Off button.
Display Modes – FM
On FM the bottom line of the display can be set to any of
the following modes:
1. Press and release the Info button repeatedly to cycle
through the various modes.
a. Radio text
displays scrolling text messages
V.H.B.N
[No RadioText]
such as artist / track name, phone in number etc.
b. Program type
displays type of station being
V.H.B.N
News
listened to e.g. Pop, Classic, News, etc.
c. Frequency V.H.B.N
106.50MHz
displays the frequency of the
station being listened to.
d. Signal strength
displays the signal strength for the
V.H.B.N
SGLV
station being listened to.
e. Battery level / Mains power V.H.B.N
Bat.level
V.H.B.N
Mains Power
displays current battery level
of using batteries operation. (If
using AC power cord operation,
"Mains Power" is shown on the
screen.)
f. Time V.H.B.N
2:18 PM
displays the current time.
g. Date
displays the current date.
V.H.B.N
8-9-2016
NOTE
If no RDS information is available, the radio will be
unable to display the station name, scrolling text and
program type information.
Scan sensitivity setting – FM
Your radio includes a local / distant option for the auto-
scan function. By setting the radio to the ‘local’ scan option,
weaker signals from more distant transmitters can be
ignored by the radio, making stronger signals easier to nd.
1.
Press the Power On / Off button to switch on your
radio.
2.
If needed, press and release the Source button until
the FM band is selected.
3.
Press the Menu button to access FM
<FM Scan Zone >
FM menu. Rotate the Tuning
control knob until “FM Scan Zone” shows on the
display. Press and release the Tuning control knob to
enter the scan sensitivity adjustment mode. The current
setting will be marked with an asterisk.
4.
Rotate the Tuning control knob to FM Scan Zone *
<Distant >
FM Scan Zone
<Local >
switch between “Local” (Strong
stations only) and “Distant” (All
stations) options on the lower line
of the display. The “Distant” option
will allow the radio to find weaker signals when
scanning.
5.
Press and release the Tuning control knob to conrm
your selection. The setting is stored in the radio and
remains in force until changed or until a System Reset.
Preset stations in DAB and FM modes
There are 5 memory presets for each DAB / FM
wavebands.
1.
Press the Power On / Off button to switch on your radio.
2.
Tune to the required station as previously described.
3.
Press and hold the required Preset Preset 1
stored
button until the display shows e.g.
Preset 1 stored. The station will be
stored under the chosen preset button. The
corresponding preset number e.g. “P1” will show on the
display. Repeat this procedure for the remaining
presets.
4.
Station stored in the memories may be over written by
following the above procedure.
Recall a preset in DAB and FM modes
1. Press the Power On / Off button to turn on the radio.
2.
Press the Source button to select the required
waveband.
3.
Momentarily press the required 87.50MHz P1
[No RadioText]
Preset button, the preset number
and station will appear in the
display.
NOTE
The display will show “Preset Empty” if no station has
been stored to that preset.
Listening to music via Bluetooth
streaming
You need to pair your Bluetooth device with your U5 DBT
before you can auto-link to play / stream Bluetooth music
through your U5 DBT. Pairing creates a ‘bond’ so the two
devices can recognize each other.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U5DBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U5DBT in the language / languages: English as an attachment in your email.

The manual is 6.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U5DBT

Sangean U5DBT User Manual - German - 17 pages

Sangean U5DBT User Manual - Dutch - 17 pages

Sangean U5DBT User Manual - French - 18 pages

Sangean U5DBT User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info