797386
7
Zoom out
Zoom in
Previous page
1/16
Next page
06
GB
F
E
NL
D
h. Time
displays the current time.
sunshine live
9:07 AM
i. Date
displays the current date.
sunshine live
8-9-2016
Finding new stations – DAB
As time passes new stations may become available. To
nd new stations proceed as follows:
1.
To carry out a full scan of the entire DAB Band III
frequencies press and release the Auto tune button.
2. As new stations are found, the
Scanning...
019
station counter on the right hand
side of the display will increase and stations will be
added to the list.
Manual Tuning – DAB
Manual tuning allows you to tune directly to the various
DAB band III channels.
1. Press the Menu button to access DAB menu.
2. Rotate the Tuning control knob to
DAB
<Manual tune >
Manual tune
<5A 174.928MHz >
nd “Manual tune”.
Press and release the Tuning
control knob to enter DAB channels
in the list. Rotate the Tuning control
knob to select required DAB channel. When required
DAB channel is found, press and release the Tuning
control knob to select the required DAB channel.
Dynamic Range Control (DRC) setting –
DAB
DRC can make quieter sound easier to hear when your
radio is used in a noisy environment.
1.
In DAB band, press the Menu button to access DAB
menu.
2.
Rotate the Tuning control knob to
DAB
<DRC >
nd “DRC ”. Press and release the
Tuning control knob to enter
adjustment mode.
3.
Rotate the Tuning control knob to
<DRC off >
DRC
*
DRC
<DRC low >
DRC
<DRC high >
select required DRC setting
(default is off).
DRC off DRC is switched off,
Broadcast DRC will be ignored.
DRC high DRC is set as sent by
broadcaster.
DRC low DRC level is set to 1 / 2 that sent by
broadcaster.
4.
Press and release the Tuning control knob to conrm
the setting.
NOTE
Not all DAB broadcasts are able to use the DRC function.
If the broadcast does not support DRC, then the DRC
setting in the radio will have no effect.
Station order setup
Your radio has 2 station order settings from which you can
choose. The station order settings are alphanumeric and
ensemble.
NOTE
The default station order on your radio is alphanumeric.
1.
Press the Power On / Off button to switch on your radio.
2.
Press the Source button to select DAB band.
3.
Press the Menu button to access DAB menu.
4.
Rotate the Tuning control knob until DAB
<Station order >
the display shows “Station order”.
Press the Tuning control knob to enter the station order
adjustment mode.
5.
Rotate the Tuning control knob to
Station order *
<Alphanumeric >
Station order
<Ensemble >
choose “Alphanumeric” or
“Ensemble”.
“Alphanumeric” -sorts the station
list alpha-numerically 0...9 A...Z.
“Ensemble” – sorts the station list by DAB multiplex.
The current setting is indicated by an asterisk.
6.
Press the Tuning control knob to select the required
station order.
Prune stations
If you move to a different part of the country, some of the
stations which were listed may no longer be available.
Also from time to time, some DAB services may stop
broadcasting, or may change location or frequency.
Stations which cannot be found, or which have not been
received for a very long time are shown in the station list
with a question mark. The prune stations function will
delete the marked DAB stations from your station list.
1.
Press the Menu button to access DAB menu.
2. Rotate the Tuning control knob to DAB
<Prune >
Prune?
<Yes> No
nd “Prune”. Press and release the
Tuning control knob to enter
adjustment mode. Then rotate the
Tuning control knob to select “Yes”
or “No”. To activate the Prune function select “Yes”, and
press and release the Tuning control knob to conrm
the setting.
3. If you do not wish to prune stations, Prune?
Yes <No>
select “No” and then press and
release the Tuning control knob to
conrm the setting.
NOTE
If you have moved your radio to a different part of the
country you should also carry out a search for new
stations (please see the section 'Finding new stations').
Operating your radio – FM
1. Straighten the antenna properly above the radio. Press
the Power On / Off button to switch on your radio.
2. Press the Source button to select FM waveband.
3. To scan up in frequency, rst rotate the Tuning control
knob in a clockwise direction and then press the
Auto tune button. Your radio will scan in an upwards
direction (low frequency to high frequency) and stop
automatically when it finds a station of sufficient
strength. To scan down in frequency, first rotate the
Tuning control knob in a anti-clockwise direction and
then press the Auto tune button. Your radio will scan
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U5DBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U5DBT in the language / languages: English as an attachment in your email.

The manual is 6.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U5DBT

Sangean U5DBT User Manual - German - 17 pages

Sangean U5DBT User Manual - Dutch - 17 pages

Sangean U5DBT User Manual - French - 18 pages

Sangean U5DBT User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info