797387
12
Zoom out
Zoom in
Previous page
1/16
Next page
GB
F
E
NL
D
11
c. Rotate the Tuning control until 'Snooze Duration'
appears on the display. Press and release the
Tuning control.
d. Rotate the Tuning control to select the desired
snooze time. The options are 5, 10, 15, 20 minutes.
Press and release the Tuning control.
3. To cancel the snooze time while the alarm is
suspended, press the Power button.
Sleep function
Your radio can be set to turn off after a preset time has
elapsed. The sleep setting can be adjusted between 15,
30, 45, 60, 90 and 120 minutes.
1. Access the menu for the current mode by pressing the
Menu button.
2. Rotate the Tuning control until ‘Sleep’ is shown on the
display. Press the Tuning control to enter the setting
menu.
3. Rotate the Tuning control to select the desired sleep
time. The options are 15, 30, 45, 60, 90, or 12 0
minutes. Use the ‘Sleep Off’ option to cancel the
sleep function. Press the Tuning control to conrm the
setting.
4. Your radio will switch off after the preset sleep time has
elapsed.
5. To cancel the sleep function before the preset time has
elapsed, either set the sleep timer to off (step 1-3) or
press the Power button.
Automatically updating the clock
1. Press the Power button to switch on your radio.
2. Press and release the Menu button until the Advanced
menu of the current mode shows on the display.
3. Rotate the Tuning control until 'System' appears on the
display. Press and release the Tuning control.
4. Rotate the Tuning control until 'Time' appears on the
display. Press and release the Tuning control.
5. Rotate the Tuning control until 'Auto Update' appears
on the display. Press and release the Tuning control.
6. Rotate the Tuning control to choose an update option
from 'Update from Any', 'Update from DAB', Update
from FM' or 'No Update' as required. The current
update option will be marked with an asterisk. Press
and release the Tuning control to conrm your choice.
The radio will exit to the previous menu.
NOTE
If you select 'Update from Any', 'Update from DAB',
Update from FM' the current time received will be
displayed. If no signal is found you should either position
the radio or its antenna so that a signal can be received,
or revert to manual clock mode.
Setting the clock manually
Your radio will set its clock automatically using the DAB or
FM radio signal. If no signal is available and you need to
set the time manually, please follow the procedure shown
below.
1. Press the Power button to switch on your radio.
2. Press and release the Menu button until the
Advanced menu of the current mode shows on the
display.
3. Rotate the Tuning control until 'System' appears on
the display. Press and release the Tuning control.
4. Rotate the Tuning control until 'Time' appears on the
display. Press and release the Tuning control.
5. Rotate the Tuning control until 'Set Time / Date'
appears on the display.
6. Press and release the Tuning control. The hour digits
will ash on the display.
7. Rotate the Tuning control to set the desired hour.
Press and release the Tuning control.
8. The minute digits will ash on the display. Rotate the
Tuning control to set the desired minute. Press and
release the Tuning control.
If the radio has been set to use a 12 hour format,
there will be an option here for setting AM or PM for
the clock time. Rotate the Tuning control to select
AM or PM. Press the Tuning control to conrm the
setting.
9. If the radio has been set to use a DD-MM-YYYY
date format (for example). The day will ash on the
display. Rotate the Tuning control to change the day
as needed. Press and release the Tuning control.
10. The month will ash on the display. Rotate the Tuning
control to set the current month. Press and release
the Tuning control.
11. The year will ash on the display. Rotate the Tuning
control to set the current year. Press and release
the Tuning control to confirm the clock setting. The
display will show 'Time Setup Saved' then exit the
menu.
NOTE
If the radio has been set to use a MM-DD-YYYY date
format, follow the steps above to set the month / day /
year setting.
Setting the time format
The display used in standby mode and when the radio is
in use can be set to 12 or 24 hour format. The selected
format is then also used when setting the alarms.
1. Press the Power button to switch on your radio.
2. Press and release the Menu button until the Advanced
menu of the current mode shows on the display.
3. Rotate the Tuning control until 'System' appears on the
display. Press and release the Tuning control.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U4D BT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U4D BT plus in the language / languages: English as an attachment in your email.

The manual is 2.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U4D BT plus

Sangean U4D BT plus User Manual - German - 18 pages

Sangean U4D BT plus User Manual - Dutch - 17 pages

Sangean U4D BT plus User Manual - French - 18 pages

Sangean U4D BT plus User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info