797387
11
Zoom out
Zoom in
Previous page
1/16
Next page
GB
F
E
NL
D
10
Alarms
Your radio has 2 separate alarms which can be set to
wake you to DAB, FM radio or buzzer alarm. Each alarm
can be set to sound once, daily, on weekdays or at
weekends. The alarms can be set whether the radio is on
or in standby mode. In the event of a power interruption
your radio has a built in memory chip that will maintain
your alarm settings for when the power is restored.
Ensure that the time is set correctly before setting the
alarms.
NOTE
If no buttons are pressed for a while, the radio will exit
the alarm setup.
Setting an alarm
1. Press and release the Alarm 1 button to enter the
setting, ‘Alarm 1 Setup’ will show on the display and
alarm 1 icon will ash on the display. Or press and
release the Alarm 2 button to enter alarm 2 setting.
NOTE
If the time is not set before setting the alarms, “Time
is not set” will show on the display. Then use the
Tuning control to set the time and date. When the
setting is complete, proceed to step 2.
2. Press the Tuning control to enter the setting menu.
3. Rotate the Tuning control to select On or Off. If Off
is selected any current setting for that alarm will be
cancelled. With ‘On’ selected, press and release the
Tuning control to cause the alarm hour digits to ash
on the display.
4. Rotate the Tuning control to choose the desired hour
for the alarm and then press the Tuning control to
cause the alarm minute digits to ash on the display.
5. Rotate the Tuning control to choose the desired
minute for the alarm and then press the Tuning
control. If the radio has been set to the 12 hour clock
format, there will also be an option here for setting
AM or PM for the alarm time. Rotate the Tuning
control to select AM or PM. Press the Tuning control
to conrm the setting.
6. The alarm duration will flash on the display. Rotate
the Tuning control to choose the alarm duration.
Choose between 15, 30, 45, 60, 90 or 120 minutes.
Press and release the Tuning control to conrm the
alarm duration.
7. The alarm source option will flash on the display.
Rotate the Tuning control to choose the desired
source for the alarm (DAB, FM, Buzzer). Press the
Tuning control when the desired source alarm is
shown on the display. For which ever radio mode is
selected, the radio alarm may be set to any of the
stations which have been stored as presets or to the
station last listened to.
8. Press and release the Tuning control to conrm the
selection. The alarm day option will flash on the
display.
9. Your alarm can be set to sound once, daily, weekdays
and weekends.
Once - Will sound at one time only.
Daily - Will sound every day.
Weekdays - Will sound only on weekdays.
Weekends - Will sound only on weekends.
10. Rotate the Tuning control to choose the day option
and then press and release the Tuning control to
conrm the setting.
If setting alarms to daily, weekdays or weekends
proceed to point 14.
If selecting the alarm to once you will need to set
the day, month and year options as described from
step 11 -13.
11. Rotate the Tuning control to select the correct day
and then press the Tuning control to confirm the
setting.
12. Rotate the Tuning control to select the correct month
and then press the Tuning control to confirm the
setting.
13. Rotate the Tuning control to select the correct year
and then press the Tuning control to confirm the
setting.
14. Rotate the Tuning control to choose the desired
volume and press the Tuning control to conrm the
setting. Your radio will show 'Alarm Saved' and will
exit the alarm setting procedure.
NOTE
Active alarms are indicated in the display by the alarm
symbol (e.g. ). If the radio cannot connect to the radio
station, buzzer alarm will be used instead. The alarm
will sound for the selected duration unless cancelled.
Cancelling alarms
1. While am alarm is sounding, it can be cancelled by
pressing the Power button.
2. To cancel the alarm before going off, enter the alarm
setting wizard and set the alarm On / Off option to ‘Off’
(Please refer to previously described ‘setting an alarm’
section). Alternatively, press the required alarm button
and rotate the Tuning control to select ‘off.’ Press the
Tuning control to conrm the setting.
Snooze
1. When the alarm sounds, press any button other than
the Power button will silence the alarm for 5 minutes.
Remaining snooze time will show on the display.
2. You can also select your required snooze time, as
following:
a. Access the menu for the current mode by pressing
the Menu button.
b. Rotate the Tuning control until 'System' appears on
the display. Press and release the Tuning control.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U4D BT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U4D BT plus in the language / languages: English as an attachment in your email.

The manual is 2.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U4D BT plus

Sangean U4D BT plus User Manual - German - 18 pages

Sangean U4D BT plus User Manual - Dutch - 17 pages

Sangean U4D BT plus User Manual - French - 18 pages

Sangean U4D BT plus User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info