797387
9
Zoom out
Zoom in
Previous page
1/16
Next page
GB
F
E
NL
D
08
Date Displays the current date.
NOTE
If no RDS information is available, the radio will be
unable to display the station name, scrolling text and
programme type information.
Scansensitivitysetting–FM
Your radio includes a local / distant option for the auto-
scan function. By setting the radio to the 'local' scan option,
weaker signals from more distant transmitters can be
ignored by the radio, making stronger signals easier to nd.
1. Press and release the Power button to switch on your
radio.
2. If needed, press and release the Source button until
the FM band is selected.
3. Press and release the Menu button until the Advanced
FM menu shows on the display.
4. Rotate the Tuning control until ‘FM Scan Zone’ shows
on the display. Press and release the Tuning control to
enter the scan sensitivity adjustment mode. The current
setting will be marked with an asterisk.
5. Rotate the Tuning control to switch between 'Local'
(Strong stations only) and 'Distant' (All stations) options
on the lower line of the display. The Distant option will
allow the radio to nd weaker signals when scanning.
6. Press and release the Tuning control to confirm your
selection. The Local or Distant setting is stored in the
radio and remains in force until changed or until a
System Reset.
Presettingstations–DABandFM
You may store your preferred DAB and FM radio stations
to the preset station memories. There are 10 memory
presets in your radio 5 for DAB and 5 for FM. Presets are
memorized by your radio in the event of a power failure.
The procedure for setting presets and using them to
tune stations is the same for FM and DAB mode, and is
described below.
1. Press the Power button to switch on the radio.
2. Press the Source button to select the DAB or FM
waveband.
3. Tune to the required station as previously described.
4. Press and hold the Preset button until the display
shows, such as,‘Preset 1 stored.’The station will
be stored under the chosen preset button. Repeat
this procedure as needed for the remaining presets.
Stations stored in preset memories may be overwritten
by following the above procedure.
Recallingapresetstation–DABand
FM
1. Press the Power button to switch on the radio.
2. Press and release the required waveband by pressing
the Source button.
3. Press and release the required Preset button to
cause your radio to tune to the station stored in preset
memory.
NOTE
The display will show 'Preset Empty' if no station has
been stored to that preset.
Listening to music via Bluetooth
streaming
You need to pair your Bluetooth device with your radio
before you can auto-link to play / stream Bluetooth music
through your U4 DBT+. Paring creates a 'bond' so two
devices can recognize each other.
PairingyourBluetoothdeviceforthersttime
1. Press the Power button to switch on the radio.
2. Press the Source button to select the Bluetooth mode.
The Bluetooth status indicator ( ) on the panel
ashes blue to show the radio is discoverable.
3. Activate Bluetooth on your device according to the
device's user manual to link to the radio. Locate the
Bluetooth device list and select the device named ‘U4
DBT+’. With some mobiles (which are equipped with
earlier versions than BT2.1 Bluetooth device, you may
need to input the pass code “0000”).
4. Once connected, the Bluetooth icon will remain in solid
blue. You can simply select and play any music from
your source device. Volume control can be adjusted
from your source device, or directly on your radio.
1. If 2 Bluetooth devices, pairing for the rst time, both
search for your radio, it will show its availability on
both devices. However, if one device links with this
unit rst, then the other Bluetooth device won't nd it
on the list.
2. If you take your source device out of range, the
connection will be temporarily disconnected to your
radio. Your radio will automatically reconnect if the
source device is brought back in range. Be aware
that during the period of disconnection, no other
Bluetooth device can pair or link with your radio.
3. If ‘U4 DBT+’ shows in your Bluetooth device list but
your device cannot connect with it, please delete
the Sangean U4 DBT+ item from your list and pair
the device with the radio again following the steps
described previously.
4. The effective operation range between the system
and the paired device is approximately 10 meters
(30 feet). Any obstacle between the system and the
device can reduce the operational range.
5. Bluetooth / NFC connectivity performance may vary
depending on the connected Bluetooth devices.
Please refer to the Bluetooth capabilities of your
device before connecting to your radio. All features
may not be supported on some paired Bluetooth
devices.
NOTE
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U4D BT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U4D BT plus in the language / languages: English as an attachment in your email.

The manual is 2.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U4D BT plus

Sangean U4D BT plus User Manual - German - 18 pages

Sangean U4D BT plus User Manual - Dutch - 17 pages

Sangean U4D BT plus User Manual - French - 18 pages

Sangean U4D BT plus User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info