797387
14
Zoom out
Zoom in
Previous page
1/16
Next page
GB
F
E
NL
D
13
6. Press and release the Menu button to exit the software
version display.
USB socket for software upgrade
Software updates for your radio
may be available in the future. As
software updates become available
software and information on how to
update your radio can be found at
http://www.sangean.com
For more information, please contact
our Head Ofce by sending an email
to contact@sangean.com
1. Using the micro USB cable
(not supplied) to connect the
USB socket in the battery
compartment and your PC
USB port.
2. Go to the website above to download the latest
software. Follow the on-screen instructions on your PC
provided with the upgrade software to complete the
software upgrade.
System reset
If your radio fails to operate correctly, or some digits
on the display are missing or incomplete carry out the
following procedure.
1. Press the Power button to switch on your radio.
2. Press the Menu button until the Advanced menu of
current mode shows on the display.
3. Rotate the Tuning control until 'System' appears on the
display. Press and release the Tuning control.
4. Rotate the Tuning control until 'Factory Reset' appears
on the display. Press and release the Tuning control.
5. Rotate the Tuning control until 'Yes' is highlighted on
the display and press and release the Tuning control. A
full reset will be performed. The station list and presets
will be erased. Alarms will be cancelled and sleep timer
settings will be set to their default values. The display
will show 'Welcome to Digital Radio' and the unit will
behave as when rst switched on.
If you do not wish to carry out a system reset, highlight
'No' and then press the Tuning control. The display will
revert back to the previous display.
In case of malfunction due to electrostatic discharge,
reset the product using the above procedure. In some
circumstances it may be necessary to disconnect and
then reconnect the mains power in order to resume
normal operation.
Setting the Backlight timeout
Your radio can be set to timeout the backlight. The
backlight timeout setting can be adjusted between ON,10,
20, 30, 45, 60, 90, 120 and 180 seconds.
1. Access the menu for the current mode by pressing the
Menu button.
2. Rotate the Tuning control until 'System' appears on the
display. Press and release the Tuning control.
3. Rotate the Tuning control until ‘Backlight’ is shown on
the display. Press the Tuning control to enter the setting
menu.
4. Rotate the Tuning control to select the desired time.
The options are on (backlight will be on all the time),10,
20, 30, 45, 60, 90, 120, or 180 seconds.
5. Your radio will switch off the backlight after the preset
time has elapsed.
Auxiliary input socket
A 3.5mm Auxiliary input socket is provided on the right
side of your radio to permit an audio signal to be fed into
the unit from an external audio device such as an iPod,
MP3 or CD player.
1. Connect a stereo or mono audio source (for example,
iPod, MP3 or CD player) to the Auxiliary input socket
(marked 'Aux In').
2. Press the Power to switch on your radio.
3. Press the Source button until the Auxiliary Input band is
selected.
4. Adjust the Volume control on your iPod, MP3 or CD
player to ensure an adequate signal and then adjust
the volume on the radio for comfortable listening.
NOTE
Never use the Aux-In socket in rainy or moist conditions
to prevent moist from entering the radio. Always keep
the rubber cover on the back well closed under these
conditions.
Charging with USB socket
Your radio has a USB socket which is intended for
charging an iPhone, smart phone or similar devices.
Charge time may vary and in some cases may take longer
to charge than when using the manufacturers charging
unit supplied with the smart phone.
When using AC power cord and the radio is in power on or
standby mode or when using batteries only and the radio
is in power on mode, the radio can charge the iPhone,
smart phone or similar devices.
1. The USB jack can only provide power for the USB
memory stick only with 1A 5V maximum and most
of iPhone models. However, it does not support
external Hard disk drive, all types of mobile phones
and electronic device.
2. The maximum volume of the output power speaker
will decrease when your USB is charging.
NOTE
1. Do not connect this USB socket with your PC USB
port, as it highly possible may cause breakdown of
the unit.
2. Never use the USB socket in rainy or moist
conditions to prevent moist from entering the radio.
Always keep the rubber cover on the back well
closed under these conditions.
IMPORTANT
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean U4D BT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean U4D BT plus in the language / languages: English as an attachment in your email.

The manual is 2.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean U4D BT plus

Sangean U4D BT plus User Manual - German - 18 pages

Sangean U4D BT plus User Manual - Dutch - 17 pages

Sangean U4D BT plus User Manual - French - 18 pages

Sangean U4D BT plus User Manual - Spanish - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info