797018
9
Zoom out
Zoom in
Previous page
1/12
Next page
08
GB
F
E
4. When the action is completed, the RDS icon will appear
on the LCD display indicating the radio time is RDS
clock time. The radio clock time will be valid for 2 days
each time the rad io time is synchronized with RDS CT.
1. If the clock time from your local RDS station is not
correct, you should consider disabling the RDS CT
function.
2. Please note that at times the RDS signal may
broadcast the wrong time, this is the fault of the radio
station, not your radio.
NOTE
Setting the alarm clock
There are two alarms which can each be set to wake you
to AM / FM radio, or buzzer alarm. The alarms may be
set while the unit is off or on. Ensure that the time is set
correctly before setting the alarms.
If no buttons are pressed for 10 seconds, the radio will
exit the alarm setup.
NOTE
1. Press and hold any of the Alarm button for more than 5
seconds until the Alarm 1 icon or Alarm 2 icon flashes
on the display followed by two beeps. You've now
entered the alarm setting (e.g. Alarm 1 button to enter
the alarm 1 setting).
2. The hour setting of alarm 1, for example, will begin
to flash. Rotate the Tuning control knob to select the
required alarm hour, and press and release the Tuning
control button to confirm the setting. Rotate the Tuning
control knob to select the required alarm minute, and
press and release the Tuning control button to confirm
the setting.
3. Then the display will show the frequency options for the
alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Rotate the Tuning control knob to choose the desired
frequency for the alarm. Press and release the Tuning
control button to confirm the setting.
4. Rotate the Tuning control knob to choose the desired
source for the alarm (Buzzer, FM or AM). Press and
release the Tuning control button to confirm the setting.
If setting alarm to Buzzer proceed to step 5.
When selecting the alarm for FM or AM, rotate the
Tuning control knob to choose your required wake-up
station or press and release the desired Preset button
(1-5). Then press and release the Tuning control button
to confirm your selection.
5. Rotate the Tuning control knob to choose the required
sound level for the alarm. Press and release the Tuning
control button to confirm the setting.
6. The alarm has now been set. The Alarm 1 icon (or
Alarm 2 icon) will show on the display.
The alarm radio can only be activated when the unit
is powered with the AC adaptor. If not (i.e. your radio
is disconnected from an AC adaptor, but inserted with
back up batteries), buzzer alarm (with no Humane
Waking System) will be activated instead.
NOTE
7. To view the status of the alarm setting, press and
release the Alarm 1 (or Alarm2) button. To quickly
change the OFF / DAILY (for example) status of the
alarm, press and hold the corresponding alarm button
(i.e. Alarm 1 or Alarm 2 button) for 2 seconds until you
hear a beep, the “OFF” or “DAILY” (for example) will
show on the display.
When the alarm sounds
When the buzzer alarm activates, the alarm will start softly
and gradually increase in level (Humane Wake System).
It will sound for 1 minute and silence for 1 minute in
repetition for 60 minutes unless cancelled. The radio will
sound non-stop at the selected time for up to 60 minutes
for other alarm types.
When the radio alarm is activated, the alarm will go off in
Humane Waking System. It will increase its volume from 0
to your set volume.
To deactivate a sounding alarm, press the Standby (main
power) button to cancel a sounding alarm.
Disabling / cancelling alarms
To cancel the alarm setting before the alarm sounds, press
and hold the corresponding alarm button (i.e. alarm 1 or
alarm 2 button) until a beep sounds and “OFF” appears
on the display. The alarm indicator will disappear from the
screen and the chosen alarm will now be disabled.
Snooze
1. When the alarm sounds, press any button other than
the Standby (main power) button will silence the alarm
for 5 minutes. “SNOOZE” will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Info / Menu button to enter the menu
setting.
3. Rotate the Tuning control knob until “SNOOZE X”
appears on the display, then press and release the
Tuning control button to enter the setting. Rotate the
Tuning control knob to adjust the silence time from 5,
10, 15 and 20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is suspended,
press and release the Standby (main power) button.
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 15, 30, 45, 60, 90 or 120 minutes.
1. Press and hold the Standby (main power) button to
enter the Sleep Timer setting.“SLEEP XX” will show on
the display.
2. Keep pressing the Standby (main power) button and
the Sleep Timer options will start switching on the
display. Stop until the required Sleep Timer setting
appears on the display. The setting will be saved and
the LCD will return to normal display.
3. Your radio will turn off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon will
show on the display indicating an active Sleep Timer.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-30 in the language / languages: English as an attachment in your email.

The manual is 2.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info