797018
11
Zoom out
Zoom in
Previous page
1/12
Next page
10
GB
F
E
FM range setting
The FM frequency Band tuning range can be different
depending on where in the world you live. It may be
necessary to adjust the FM range to allow the radio to
work properly.
1. After the tuning step setting is completed, rotate the
Tuning control knob until the FM frequency range
shows on the display. Then press the Tuning control
button to enter the FM range setting.
2. Rotate the Tuning control knob to select the desired FM
range and press the Tuning control button to confirm
the setting.
The available FM range is as following:
FM: 87.5-108 MHz (North America) (default) Your radio
is preset with this tuning range, no adjustments are
necessary if you live in North America.
FM: 76-90 MHz (for Japan)
FM: 64-108 MHz (for Eastern European countries and
Russia)
FM: 76-108 MHz (for some of China area and European
countries)
USB socket for iPhone / Smartphone
charging
Your radio has a USB socket which is intended only
for charging an iPhone, smartphone or similar devices.
Charge time may vary and in some cases may take longer
to charge than when using the manufacturers charging
unit supplied with the smart phone.
1. The radio can charge your iPhone, smartphone or
similar devices when the radio is in power on or
standby mode, in FM / AM radio mode, Sound mode,
BT mode or AUX IN mode.
2. Connect your smartphone to the USB charging socket
on the rear of your radio.
3. Your iPhone or smartphone will begin to charge.
4. Once your iPhone or smart phone has fully charged
remove the USB cable.
Charging mobile phones (for example) or other devices
may affect the listening quality when listening to the AM /
FM band.
NOTE
The charger may not supply power to some USB
devices.
When not using or after charging, remove the USB
cable.
Do not connect power source to USB port. Otherwise
there is a risk of fire. The USB port is only intended
for charging lower voltage device.
Do not insert a nail, wire, etc. into the USB power
supply port. Otherwise a circuit short may cause
smoke and fire.
Do not connect this USB socket with your PC
USB port, as it is highly possible that it may cause
breakdown of the units.
Never use the USB socket in rainy or moist conditions
to prevent moisture from entering the radio.
IMPORTANT
System reset
If your radio fails to operate correctly, or some digits
on the display are missing or incomplete carry out the
following procedure.
1. When the radio is in power on or standby mode, press
and hold the Info / Menu button until you hear a beep
to enter the menu setting.
2. Rotate the Tuning control knob until “FACTORY”
appears on the display. Press and release the Tuning
control button, the “RESET NO” will appear on the
display and “NO” will flash. Rotate the Tuning control
knob to select “NO” or “YES”. If you do not wish to
carry out a system reset, select “No” and then press
the Tuning control button. The display will revert back
to the previous display.
3. To select “YES”, press and release the Tuning control
button. A full reset will be performed. All station presets
will be erased. Alarms will be cancelled and the sleep
timer settings will be set to their default values. All the
icons will show on the display and the radio will turn off
automatically. In case of malfunction due to electrostatic
discharge, reset the product (reconnection of the power
source may be required) to resume normal operation.
4. You may also elect to unplug your radio for at least 12
hours to reset your radio.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-30 in the language / languages: English as an attachment in your email.

The manual is 2.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info