Manual Sangean RCR-30 (page 8 of 12) (English)

797018

Zoom out

Zoom in

1/12

1. Turn on the NFC feature on your device. (Important:

Please make sure the screen of your playing device is

on and unlocked to allow NFC to work.)

2. Touch the NFC area of your playing device against the

NFC area marked on the top of your radio. The unit

will enter automatic pairing mode. If you pair the unit

for the first time, some NFC enabled devices will ask

permission to link with the radio. Once paired with a

device, ‘Connecting RCR-30…’ or a similar message is

shown on your NFC-enabled device.

3. Use the controls on your device or on your radio to play /

pause and navigate tracks.

1. NFC connectivity performance may vary depending

on the connected Bluetooth device. Please refer

to the Bluetooth capabilities of your device before

connecting to your radio. All features may not

be supported on some Bluetooth / NFC enabled

devices.

2. The location of the NFC detection area is not the

same on all devices. When connecting with other

Bluetooth devices via NFC, refer to the User guide of

the other device for more information.

3. Some metallic cases or covers for mobile phones

may reduce the sensitivity of NFC. Make sure you

remove it, before activating the NFC.

NOTE

Disconnecting your NFC-enabled device

To disconnect your device, simply touch it again on the

top panel of the radio.

Please make sure the screen of your playing device is

on and unlocked to allow NFC to work.

IMPORTANT

Clock and Alarms

Setting the time format

The clock display used in standby mode and on the

playing mode screens can be set to 12 or 24 hour format.

The selected format is then also used when setting the

alarms.

1. Press and hold the Info / Menu button to enter the

menu setting.

2. Rotate the Tuning control knob until “CLOCK XXH”

appears on the display, then press and release the

Tuning control button to enter the setting and the

setting of time format begins to flash.

3. Rotate the Tuning control knob to select either 12 or

24 hour format. Press and release the Tuning control

button to confirm your choice of clock format. The

display will then revert to the previous menu. If the 12

hour clock format is chosen, the radio will then use

the 12 hour clock for the setting of alarms with a PM

indicator.

Setting the date format

1. Press and hold the Info / Menu button to access the

menu setting.

2. Rotate the Tuning control knob until a date (e.g. 1--1

TUE) shows on the display. Press and release the

Tuning control button to enter the date format setting.

3. Rotate the Tuning control knob to select the required

date format. Press and release the Tuning control

button to confirm your choice of date format. The

display will then revert to the previous menu.

Setting the clock time and date

Your RCR-30 has two options to set up its clock time: FM

Radio Data System (RDS) and Manual setting.

Manual setting

When choosing the manual setting as the clock time

setting of your radio, the Radio Data System (RDS)

function will be disabled.

1. Press and hold the Info / Menu button to enter the

menu setting.

2. Rotate the Tuning control knob until a clock symbol

appears on the left side display, then press and release

the Tuning control button to enter the setting. Rotate

the Tuning control knob until “MANUAL” appears on

the display, then press and release the Tuning control

button to select the setting.

3. Rotate the Tuning control knob until “CLOCK ADJ”

appears on the display. Press and release the Tuning

control button to enter the setting.

4. The hour setting on the display will begin flashing.

Rotate the Tuning control knob to select the desired

hour, and press and release the Tuning control button

to confirm the setting. Then rotate the Tuning control

knob to select the desired minute, and press and

release the Tuning control button to confirm the setting.

5. Rotate the Tuning control knob until “DATE ADJ”

appears on the display. Press and release the Tuning

control button to enter the setting.

6. Rotate the Tuning control knob to select the desired

year, and press and release the Tuning control

button to confirm the setting. Then rotate the Tuning

control knob to select the desired month, and press

and release the Tuning control button to confirm the

setting. Then rotate the Tuning control knob to select

the desired date. Press and release the Tuning control

button to confirm the setting and the radio will beep

once.

Radio Data System (RDS)

When you set the clock time using the RDS function, your

radio will synchronize its clock time whenever it tunes to a

radio station using RDS with CT signals.

1. When tuning to a station transmitting RDS data, press

and hold the Info / Menu button to enter the menu

setting.

2. Rotate the Tuning control knob until a clock symbol

appears on the display. Press and release the Tuning

control button to enter the setting.

3. Rotate the Tuning control knob until “RDS CT” appears

on the display. Press and release the Tuning control

button to confirm the setting. The clock time of the

radio will set up automatically according to the RDS

data received.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-30 in the language / languages: English as an attachment in your email.

The manual is 2.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sangean RCR-30 Manual

Product: