Manual Sangean ATS-909X2 (page 12 of 19) (English)

797034

Zoom out

Zoom in

1/19

RECALLING PRESET STATIONS – SW

ONLY

Follow these steps to recall a preset station on the SW

band:

1. Turn on the radio using the Power button (10).

2. Select the desired waveband by pressing the

corresponding button.

3. Press the Page button (27) once and then use the

Rotary Tuning knob (16) or Tuning Up / Down buttons

(18) to select the desired page number.

4. Press the Enter button (30) to confirm the page

number.

The radio will now scan the selected page and

automatically select the preset with the strongest signal

on the selected page.

5. Press any of the numeric buttons (19) to recall the

corresponding preset station.

LOCKING PRESET STATIONS

After storing preset stations, it is possible to lock them in

order to prevent accidentally deleting them, for instance

because of accidentally starting the ATS feature.

1. Turn on the radio and recall the desired preset station

as previously described.

2. Press the Memo button (24).

The Memo indicator (X) and the preset position of the

selected station (S) will now be blinking on the display.

3. Press the Memory Lock button (26).

After locking a preset station, the Preset lock indicator

(V) will be shown on the display to indicate the preset

station is locked and cannot be deleted.

Repeat this procedure to unlock preset stations again.

DELETING PRESET STATIONS

To delete a preset station from the radio's memory, follow

these steps:

1. Turn on the radio and recall the desired preset station

as previously described.

2. Press the Memo button (24).

The Memo indicator (X) and the preset position of the

selected station (S) will now be blinking on the display.

3. Press the Cancel button (31).

NOTE

Locked stations cannot be deleted using this method.

When trying to delete a locked preset station, the Text

display (U) will show the message "MEMO LOCK".

In this case the preset station can only be deleted by

unlocking it rst.

MOVING PRESET STATIONS TO ANOTHER

POSITION

Preset stations can be moved to another preset position

and / or page. If another station is already saved at the

desired preset position, then the stations will switch

positions if they are on the same page. If they are not on

the same page, the station that was originally saved at the

selected preset position will be moved to the first available

preset position.

You can move a preset station in memory by following

these steps:

1. Turn on the radio and recall the desired preset station

as previously described.

2. Press the Memo button (24).

The Memo indicator (X) and the preset position of the

selected station (S) will now be blinking on the display.

3. Select the desired page using the Page button (27).

4. Press the numeric button (19) corresponding to the

desired preset number.

NOTE

Although locked preset stations cannot be deleted, they

can be moved using this feature.

RENAMING PRESET STATIONS – MW / LW /

FM / AIR

The names of preset stations on the MW, LW, FM and AIR

bands can be changed by following these steps:

1. Turn on the radio, select the MW, LW, FM or AIR band

and recall the desired preset station as previously

described.

2. Press the Edit button (28).

The first character of the preset name will now blink in

the Text display (U).

3. Use the Rotary Tuning knob (16) or numeric buttons

(19) and Tuning Up / Down buttons (18) to select

characters, edit them and enter the desired name.

4. Press the Enter button (30) to confirm and save the

name.

RENAMING PRESET PAGES – SW ONLY

On the SW band, only preset pages have names. To

change the name of a preset page, follow these steps:

1. Turn on the radio, select the SW band and recall the

desired preset page as previously described.

2. Press the Edit button (28).

The first character of the page name will now blink in

the Text display (U).

3. Use the Rotary Tuning knob (16) or numeric buttons

(19) and Tuning Up / Down buttons (18) to select

characters, edit them and enter the desired name.

4. Press the Enter button (30) to save the name.

5. ADVANCED TUNING FEATURES

SETTING THE METER BAND – SW

ONLY

When the SW band is selected, a meter band can also

be selected to adjust the frequency range of the radio.

In total, there are 14 meter bands available that can be

selected as follows:

1. Turn on the radio using the Power button (10).

2. Press the ATS / METER / SW button (20) to select the

SW band.

3. Press the ATS / METER / SW button (20) again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sangean ATS-909X2 in the language / languages: English as an attachment in your email.

The manual is 2.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean ATS-909X2

Sangean ATS-909X2 User Manual - German - 20 pages

Sangean ATS-909X2 User Manual - Dutch - 21 pages

Sangean ATS-909X2 User Manual - French - 21 pages

Sangean ATS-909X2 User Manual - Spanish - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sangean ATS-909X2 Manual

Product: