629996
10
Zoom out
Zoom in
Previous page
1/76
Next page
ENGLISH
Setting-Up the C•control
8
Connecting Stereo Recorders and Sound Sources
C control Inputs
The C control features four 2-track /Stereo inputs for connecting a variety of sounds sources including the
output of the main mixing console or computer sound card, a DAT recorder, Open Reel Half-track (dust them
off, they still sound great), Cassette recorder, CD player, MIDI workstation or sub mixers to name some. Each
of the C controls stereo inputs can be turned on or off from the front panel assign switches. For added flexibil-
ity, it is possible to have any or all of the 2-track /Stereo inputs on at the same time. This is particularly useful
when connecting the outputs of a main mixing console or computer sound card, and the outputs of a sub-
mixer or MIDI workstation allowing you to monitor both sound sources and control them as if they were one.
Because the C control provides many inputs and outputs for connecting your gear, there are many ways the
unit can be interfaced. The following section describes the 2-track /Stereo inputs and how they can be used
with equipment commonly found in a recording studio. There is also a Typical Set-up” diagram on page 15 of
this manual and a wiring guide on page 17 to help you choose the correct cables for your set-up.
MIX Inputs
The MIX inputs are C control’s main Left and Right stereo inputs. These inputs are balanced, 1/4-inch, TRS (Tip/
Ring/ Sleeve) phone connectors which accept +4dB line level
sources. You should connect the outputs of your mixing console
or computer sound card here.
2-track A Inputs
The 2-Track A inputs are balanced, 1/4-inch, TRS (Tip/ Ring/
Sleeve) phone connectors which accept +4dB line level sources.
You can interface a professional DAT machine or CD recorder
here.
2-track B Inputs
The inputs labeled 2-Track B are balanced 1/4 inch,TRS (Tip/Ring/Sleeve) connectors which accept +4dB line
level sources. You can connect the outputs of a sub mixer, a professional DAT machine, or a CD recorder here.
2-track C Inputs
The 2-Track C inputs are unbalanced, RCA connectors which accept -10dB line level sources. You can connect
the outputs of a sub mixer, cassette recorder or CD player here.
POWER
AC IN
14 V
SAMSON
MADE IN CHINA
+
-
500mA
MIX IN
2TK
A2TK B2TK C2TK A2TK B2TK C
L
R
L
R
R
L
SPK AEXT CUE
TALK
REMOTE
SPK B
SPK
C
BALANCEDBALANCED
BALANCEDBALANCED
BALANCEDBALANCED BALANCED
INPUT
OUTPUT
L
R
D
4
1
2
3
4
1234
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson C.control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson C.control in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 21,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info