629996
8
Zoom out
Zoom in
Previous page
1/76
Next page
ENGLISH
Quick Start
QUICK SET-UP
Setting up your C control is a simple procedure, which takes only a few minutes. There are many ways to interface the
C control with various recording set-ups, so take some time to decide which audio devices you want to connect. The
following section shows a simple set-up for a typical recording studio with an analog console and two sets of powered
studio monitors.
Remove all packing materials (save them in case of need for future service) and plug the provided AC adapter in to the
rear AC power inlet, but don’t plug the power pack into a wall outlet just yet.
Set the controls to the following positions:
MIX SWITCH - IN (LED ON)
2TK A SWITCH - OUT (LED OFF)
2TK B SWITCH - OUT (LED OFF)
2TK C SWITCH - OUT (LED OFF)
HEADPHONE VOLUME - 0
CONTROL ROOM VOLUME - 0
CONTROL ROOM SPKR B VOLUME - 0
MUTE SWITCH - OUT (LED OFF)
DIM SWITCH - OUT (LED OFF)
SPEAKER A SWITCH - IN (LED ON)
SPEAKER B SWITCH - OUT (LED OFF)
SPEAKER C SWITCH - OUT (LED OFF)
TALKBACK LEVEL - O
TALK TO CUE SWITCH - OUT (LED OFF)
TALK TO 2TK SWITCH - OUT (LED OFF)
MIX 2TK A
2TK C
2TK B
OL
+6
0
-6
-18
-30
L R
SPEAKER A SPEAKER C
MUT
E
SPEAKER B
SU
B
DIM
MONO
HEADPHONE
VOLUME
SPK B
VOLUME
HEADPHONE
VOLUME
0 10
0 10
0 10
TALKBACK
LEVEL
MI
C
TALK TO
2TK
TALK TO
CUE
0 10
CONTROL ROOM
MA
TRIX
SAMSON
SOURCE
DESTINATION
LEVEL
CONTROL ROOM
TALKBACK
Connect your mixers control room outputs, or the main stereo source that you want monitored, to the Left/
Right MIX input jacks on the C control’s rear panel. The C control accepts both balanced and unbalanced signals.
Generally, a balanced signal is preferable because it provides better signal-to-noise ratio and reduced extrane-
ous noise. For a detailed wiring guide, see page 17 in this manual.
Connect the C control’s SPEAKER A left and right outputs to the inputs of your main powered monitors. The
SPEAKER A outputs are balanced, however it is possible to use balanced and unbalanced cables. Generally, a bal-
anced signal is preferable because it provides better signal-to-noise ratio and reduced extraneous noise. For a
detailed wiring guide, see page 17 in this manual.
Connect the C control’s SPEAKER B left and right outputs to the inputs of your power amp or powered monitors.
Plug the C control’s power pack into a wall outlet and switch the unit on by pressing the power switch.
Now, turn on your power amps or powered studio monitors and set the level control to their normal positions.
6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson C.control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson C.control in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 21,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info