Manual Sagem ATA 101S (page 14 of 132) (English, German, French, Italian, Portuguese, Spanish)

521757

Zoom out

Zoom in

1/132

10 Sagem Fax ATA 101S

For example, for the ATA with a MAC address 00:60:4c:99:99:99

there is a corresponding file "Sagem_00604c999999.txt", the content

of which (below) specifies the settings of the SIP account (user name,

password, etc.) likely to be used with this ATA:

MACConfigversion = V1_01

sip/configphone 1 444719 -o -d Lecoq

sip/configauth 1 444719 MySecretPassword

save

sip/register all

These CLI command files must be in ASCII format.

Loading files from the TFTP server

After creating the command files, you have to connect the ATAs to

your company’s computer network. For this purpose, you have to use

your ATA "WAN" port. Indeed, only this port has a DHCP client

allowing the ATA to request an IP address from the DHCP server and

also to receive the address from the TFTP server and the input

filename. These must be defined at the DHCP server end, as options

66 and 67 respectively.

As soon as it is connected to the network, each ATA automatically

downloads the input file. If this file specifies a new firmware, this

firmware is then downloaded. If not, the ATA downloads its two setup

files (the common file then the customized file) to run their CLI

commands.

Note

To create these ASCII files, contact Sagem

Communications or your dealer to obtain the ATA’s

list of CLI commands.

Important

Make sure not to use the ATA LAN port for the

"automatic setup" mode, as you will encounter IP

address conflicts.

Sagem_Fax_ATA101S.book Page 10 Jeudi, 21. février 2008 5:09 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sagem ATA 101S in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sagem ATA 101S Manual

Product: