521757

Sagem ATA 101S Manual

12
Zoom out
Zoom in
Previous page
1/132
Next page
8 Sagem Fax ATA 101S
• T.38: in this mode which is specifically adapted for fax transfers,
the signals are demodulated and their digital data are
encapsulated in IP packets. This mode increases reliability and
considerably lowers bandwidth needs compared with the "pass
through" mode.
The Sagem Fax ATA 101S can support DTMF recognition, call
transfer, putting on hold, VAD, etc.
If need be, you can contact our support department “See Customer
Information”, page 17).
AUTOMATIC INSTALLATION AND SETUP (VIA TFTP)
To administer a large number of Sagem Fax ATA 101S, it is
recommended to use the TFTP method. This mode allows a server to
deploy firmware updating and setting up on the ATAs in the network.
Installing the TFTP server
You first have to install a TFTP server.
• If you already have an existing TFTP server, you can use it to
remotely deploy the settings of your ATA units.
• If you do not have a TFTP server, you have to install one in your
network before continuing.
Creating CLI command files
After installing your TFTP server, you have to create CLI command
files. The server will load them into the ATAs which will then run them.
You have to create at least three files.
The first, so-called, entry file specifies the name of the up-to-date
firmware (which the ATAs will download if need be), and the name of
the setup file applicable to all the ATAs (see next paragraph).
The example below is the content of an entry file called
"TFTPEntry.txt":
fw_filename = S3-SIP-PIT-1-26-355-1019.bin
common_config = common_parameters.txt
Note
This method is recommended when installing and
setting up more than 10 units.
Sagem_Fax_ATA101S.book Page 8 Jeudi, 21. février 2008 5:09 17
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem ATA 101S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem ATA 101S in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info