521757

Sagem ATA 101S Manual

16
Zoom out
Zoom in
Previous page
1/132
Next page
12 Sagem Fax ATA 101S
SAFETY INSTRUCTIONS
Read these safety notes carefully before using this product to make sure
you operate the equipment safely.
Warning: This warning alerts users to areas of the product
where there is the possibility of personal injury.
Your Sagem Communications product and recommended
supplies have been designed and tested to meet strict safety
requirements. These include safety agency approval, and compliance to
established environmental standards. Please read the following
instructions carefully before operating the product and refer to them as
needed to ensure the continued safe operation of your product. The safety
and environment testing and performance of this product have been
verified using Sagem Communications materials only.
Warning: Any unauthorized alteration, which may include the
addition of new functions or connection of external devices, may
impact the product warranty. Please contact your authorized
Service Provider for more information.
Warning Markings: All warning instructions marked on or supplied with
the product should be followed.
Do not remove the type plate from your device; this would voice the
warranty.
Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture. Do not place the device in the vicinity of heaters
or air conditioners. In the event that the device becomes too hot, or if you
see smoke coming from the device, you must immediately pull the power
cable out of the power socket. Have your device examined by trained
professionals at a technical service location. To prevent the spread of fire,
open flames should be kept away from the device.
Electrical Supply
This product shall be operated from the type of electrical supply indicated
on the product’s data plate label. If you are not sure that your electrical
supply meets the requirements, please consult your local power company
for advice.
Warning - Electrical Safety Information
• Only use the supplied power supply (KSAD1200150W1UK A - NETBIT
for UK; KSAD1200150W1EU A - NETBIT for Europe;
KSAD1200150W1US - Ktec for USA/Canada).
Using an unauthorized power supply may damage the device.
Connect it to a mains outlet in compliance with the installation
instructions in this booklet and the indications stated on the
identification label located on the unit (voltage, current and frequency of
the electricity network). As a precaution, in case of danger, the mains
adapters act as a disconnecting mechanism for the 110V or 230V
power supply. They should be placed near the device and should be
easily accessible.
• This equipment is to be used on a branch circuit, that has larger
capacity than rated ampere and voltage of this machine. See data plate
on the rear panel for the rated ampere and voltage of this equipment.
• Do not place this equipment where people might step on or trip over the
power cord.
• Do not plug in the device in moist rooms.
Sagem_Fax_ATA101S.book Page 12 Jeudi, 21. février 2008 5:09 17
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem ATA 101S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem ATA 101S in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info