617954

Sage BEM800 - the Scraper Mixer Pro Manual

7
Zoom out
Zoom in
Previous page
1/26
Next page
12 13
PAge heAder..... PAge heAder.....
ASSEMBLY & OPERATION
4. If the mixer has not been used for
5 minutes it will automatically
change from STANDBY mode to
a power saving OFF mode and the
illuminated LED will switch off. To
exit OFF mode and begin mixing,
turn the dial to the selected speed
or press one of the count up/down
timer buttons.
5. Do not turn the mixer on with the
scraper beater in place if the mixing
bowl is empty. This will cause the
scraper beater to make a loud noise
as it scrapes the bowl.
6. When ingredients are in the mixing
bowl, the scraper beater may make
a slight noise as it scrapes the
sides and bottom of the bowl. This
is normal and should not cause
concern.
Count-up timer
The count-up timer is for gauging mixing
time. You can monitor the time it takes to
thoroughly mix the ingredients, so that the
next time you mix the same ingredients you
can set the count-down timer for the
specific time.
The count-up timer will automatically
begin counting up as soon as the dial is
rotated from OFF to one of the speeds.
When the dial is turned to PAUSE the total
time will be displayed on the LCD and will
flash. When the dial is turned to OFF, the
LCD display will reset back to 0:00.
Count-down timer
The count-down timer is for any recipe that
specifies the length of time ingredients
should be mixed. For example, if a recipe
reads, “beat for 3 minutes”.
To set the count-down timer, press the up or
down arrows until the desired mixing time is
displayed on the LCD screen. Press and hold
to scroll more quickly.
Rotate the dial to select the desired speed,
and begin mixing. When the timer has
finished counting down, it will beep. The
motor will automatically turn off and the
timer will flash OFF.
The control dial must to be rotated to the
OFF position to reset the timer and to
continue mixing.
The maximum time displayed on the timer
is 60 minutes. The mixer will automatically
switch OFF at 60 minutes. The control dial
needs to be rotated to the OFF position to
reset the timer and to continue mixing.
Pause mode
While mixing, at any stage, you can rotate
the control dial to the PAUSE setting. This
will suspend the timer, and turn the motor
off. This enables you to assess the mixing
progress or add additional ingredients
without affecting the timer.
For example, if you are mixing using the
count-up timer mode, you can rotate the
control dial from one of the mixing speeds
to PAUSE. The mixer motor will stop and
the timer will pause.
Once ready, rotate the dial back to one of the
mixing speeds and the timer will continue to
count-up from the exact time it was paused.
Alternatively, if the mixer is on PAUSE, you
can reset the timer to 0:00 by rotating the
dial to OFF.
The PAUSE function can also be used in
the count-down timer mode. To continue
mixing, rotate the dial back into one of the
mixing speeds to allow the timer to continue
counting down.
ASSEMBLY & OPERATION
Using the scraper beater
• The scraper beater can be used for a
variety of mixing tasks. These include
creaming butter and sugar, pastry, cake
and biscuit doughs, batters, icing and
frosting. The scraper beater creates
a much more efficient mixing action,
which means the mixing time of many
recipes will be reduced. Refer to the
chart below for approximate mixing
times for common mixing tasks.
• Longer mixing times may be required
for larger or double quantities.
• Do not use the scraper beater for mixing
heavy dough (bread, pizza etc) or
whisking egg whites.
• When adding flour to the mixing bowl,
always use splash guard and ensure the
mixer is on the folding/kneading setting.
This will prevent flour from escaping the
bowl.
• The scraper beater can also be used as a
spatula when removing cake, biscuits or
other mixtures from the mixing bowl.
SPEED SETTING ATTACHMENT FOR
Kneading/Folding Bread dough
Creaming/Beating
Packet cake mixes, muffins.
Creaming butter and sugar,
cream cheese,
heavy batters
Whipping/Aerating
Cream, egg white/meringues,
marshmallow
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BEM800 - the Scraper Mixer Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BEM800 - the Scraper Mixer Pro in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info