711612

Sage BDC400 Manual

8
Zoom out
Zoom in
Previous page
1/120
Next page
8
Operation
WATER HARDNESS SETTING
& FLUSHING
1. Ensure that the empty coee basket and empty
carafe (with lid attached) are inserted into
the machine.
2. Fill the water tank with fresh cold water to
the MAX mark on the water tank. Plug into
power outlet.
3. When rst turned on, the machine will show
‘SEt HArdnESS’ on LCD, asking you water
hardness level. Press SELECT dial once. Dip
the water hardness test strip into the lled water
tank for 1 second. Remove and wait 1 minute to
reveal the result.
4. Rotate SELECT dial until the corresponding
test result is shown on the screen. Press to set.
5. Install the water lter into the water tank before
continuing to the ush cycle.
6. The machine will show ‘FLUSH Unit’ on LCD.
Press SELECT dial to commence ush cycle.
The machine will dispense all the water from
the tank, through the system and into the empty
carafe. After ushing, empty the basket and
carafe.
INSTALLING THE WATER FILTER
This product is designed to be used with a water
lter installed in the water tank. Not doing so will
aect the internal components and performance of
the appliance.
The lter cartridges should be replaced regularly;
when indicated on the LCD screen.
NOTE
All water tank levels will be incorrect if the machine
is used without the water lter correctly installed.
1. Remove the water lter and water lter adapter
from the packaging.
2. Soak the lter in cold water for 5 minutes.
3. Attach water lter to adapter.
4. Insert the assembled water lter and adapter
into the water tank.
5. Fill the water tank with cold water to the
indicated MAX marking.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BDC400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BDC400 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info