668324

Sagab by Elma 945 - Digital clamp meter Manual

3
Zoom out
Zoom in
Previous page
1/10
Next page
Sagab by Elma
945
25
DANGER
x Never use the meter to measure voltages on a circuit above the maximum
allowable input value on any function
x Do not exceed the maximum allowable input of any measurement range.
x Never touch exposed wiring, connections or any live circuit when attempting to take
measurements.
x Do not attempt to make measurement in areas with flammable gasses, fumes,
vapor or dusk. The use of the instrument in these areas may cause sparking which
can lead to an explosion.
x Do not attempt to use the instrument if its surface or your hand is wet.
x Never open the battery compartment cover when making measurements.
WARNING
x Always inspect he meter and test leads for any signs of damage or abnormality
before use. If the meter or its accessories have any structural defects such as
broken test leads, cracked cases, exposed metal parts or the display is not reading,
do not attempt to make measurements.
x Do not turn the function switch whilst test leads are connected to the meter.
x Do not install substitute parts or make modification to the meter. Return the meter to
your distributor for repair or re-calibration.
x Ensure the meter is switch off before opening the battery cover when replacing the
battery.
x Never replace a battery if the surface of the meter is wet or moist.
CAUTION
x Before making measurements ensure that the function selector switch is set on the
appropriate range position.
x Always make sure that the plug of each test lead is inserted fully into the
appropriate terminal of the meter
x Ensure that the function selector switch is set to the OFF position after use. When
the meter is stored for extended periods the battery should be removed.
x Do not expose the meter to direct sunlight, extreme temperatures or moist.
x Do not use abrasives or solvents on the meter. To clean it use a damp cloth and
mild detergent only,
x Qualified and trained service technicians should only perform calibration and repair
of the meter.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagab by Elma 945 - Digital clamp meter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagab by Elma 945 - Digital clamp meter in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info