668324

Sagab by Elma 945 - Digital clamp meter Manual

9
Zoom out
Zoom in
Previous page
1/10
Next page
Sagab by Elma
945
31
Temperature measurement
1. Set the function switch to TEMP range position. The instrument automatically
defaults to °C range.
2. Push the MODE button to switch between °C and °F
3. Insert the temperature adapter into the V Ω TEMP HZ input terminal and the COM
terminal. Be aware of correct polarity.
4. Connect any K-Type probe into the meter adaptor
5. Read the display.
Diode test
1. Set the function switch to range position.
2. Press the MODE button to select the Diode test. The meter automatically defaults to
resistance.
3. Insert the red test lead into the V Ω TEMP HZ input terminal and the black test lead
to the COM terminal.
4. Connect the other end of the test leads to the component under test.
5. Read the display.
Note: Use the diode test to check diodes, transistors, silicon controlled rectifiers and other
semiconductor devices.
Normal forward voltage drop for a good silicon diode is between 0,4V to 0,9V. A reading
higher than that indicates a leaky (defective) diode. A zero reading indicates a shorted
diode.
Reverse the test leads connection (reverse bias) across the diode. The display shows “OL”
if the diode is good. Any other reading indicates the diode is shorted or resistive (defective)
Continuity testing
1. Set the function switch to the range position.
2. Press the MODE button to select the continuity test range. The meter automatically
defaults to resistance.
3. Insert the red test lead into the V Ω TEMP HZ input terminal and the black test lead
to the COM terminal
4. Short the tip of the test leads and make sure the display reads 0 (zero) and the
buzzer beeps.
5. Connect the tip of the test leads to the circuit or component under test. The display
reads the resistance and the buzzer beeps when the reading is not more than about
35Ω
WARNING: Before attempting to make a resistance measurement ensure there is no
voltage present on the circuit under test.
Data hold
This is a function used for freezing the actual value on the display.
1. Press the HOLD button once. The meter beeps and HOLD is displayed.
2. Pres HOLD button once again to disable the hold function
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagab by Elma 945 - Digital clamp meter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagab by Elma 945 - Digital clamp meter in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info