668324

Sagab by Elma 945 - Digital clamp meter Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
Sagab by Elma
945
30
AC True RMS voltage measurement
1. Set the function switch to V-HZ range position.
2. Press the MODE button to select the AC volt range. The meter automatically
defaults to DC volts.
3. Insert the red test lead into the V Ω TEMP HZ input terminal and the black test lead
to the COM terminal.
4. Connect the other end of the test leads to the circuit under test.
5. Read the display.
Note: The meter is default set to Autorange.
Pressing the PEAK hold button will allow the user to record the peak maximum and
minimum reading on the AC volt range.
Resistance measurement
1. Set the function switch to range position. The meter automatically defaults
to resistance range.
2. Insert the red test lead into the V Ω TEMP HZ input terminal and the black test lead
to the COM terminal.
3. Connect the other end of the test leads to the circuit or component under test.
4. Read the display.
Note: The meter is default set to Autorange mode.
WARNING: Before attempting to make a resistance measurement ensure there is no
voltage present on the circuit under test.
Capacitance measurement
1. Set the function switch to the CAP range position.
2. Insert the red test lead into the V Ω TEMP HZ input terminal and the black test lead
to the COM terminal
3. Connect the other end of the test leads to the circuit or component under test.
4. Read the display
Note: In capacitance range the meter is Autoranging only.
CAUTION: To avoid damage to the meter or the equipment under test, remove all power
from the circuit and discharge all capacitors before measuring capacitance.
Large value capacitors should be discharged through a appropriate resistance load. Use
the DC voltage function to confirm that the capacitor is discharged.
Frequency measurement
1. Set the function switch to the V~Hz range position.
2. Pres the mode button to select frequency range. The meter automatically defaults
to DC volts.
3. Insert the red test lead into the V Ω TEMP HZ input terminal and the black test lead
to the COM terminal.
4. Connect the other end of the test leads to the circuit or component under test.
5. Read the display.
Note: In frequency range the only option is autorange.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagab by Elma 945 - Digital clamp meter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagab by Elma 945 - Digital clamp meter in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info