767114
22
Zoom out
Zoom in
Previous page
1/28
Next page
E. Installing Forward Facing
42
41
E-5 Installing Forward Facing
With Vehicle Belts
Do not use the LATCH system along with the
vehicle belt. Store LATCH belts when using the
vehicle belts.
Check the vehicle belt before each use. Use
only if the belt is tightened properly and
securely.
Failure to follow these warnings can result in
serious injury or death.
Store LATCH
1.
Place Child Restraint
in Vehicle
Forward Facing
Place child restraint flush
against the back of the
vehicle seat forward
facing in the back seat.
Kickstand MUST be folded
out in order to use this
seat.
2.
NOTE: Review the section D-4 and your vehicle’s owner
manual to determine what kind of vehicle belts you have.
Thread Vehicle Belt
Thread the vehicle lap
or lap/shoulder belt
combination through the
forward-facing belt path
and out the other side.
Buckle vehicle belt.
3.
Tighten Vehicle Belt
Push down firmly on the
child restraint and pull on
the shoulder belt or lap belt
adjuster to tighten.
With a switchable retractor,
pull the shoulder belt all
the way out to switch the
retractor into the ALR mode
before tightening. Feed the
slack back into the retractor
while tightening.
4.
Installation Tip:
Loosely attach
the tether hook
before threading
the vehicle belt.
Consult vehicle’s
owner manual for
specific location.
Do not use this seat with the kickstand folded
in.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Safety 1st Summit 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Safety 1st Summit 65 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info