767114
26
Zoom out
Zoom in
Previous page
1/28
Next page
Locate Locking Clip
Location
Grasp both vehicle belts
together just behind the
latch plate and unbuckle.
NOTE: If the latch plate
ends up just at the belt path
opening so you cannot grasp the vehicle belt at the latch
plate, grasp the vehicle belts on the opposite side of the
child restraint, as close to the latch plate as possible.
50
49
You will rarely need to use a locking clip except in
some older vehicles. Built in child restraint locking
systems have been required in vehicles since 1996,
and many vehicles had these features even earlier.
Check your vehicle’s owner manual to learn how to
use the systems in your vehicle. If you need a locking
clip, return to the store where you purchased this child
restraint to purchase a locking clip or call us at 1-800-
544-1108 to order one.
Locking clips from any child restraint
manufacturer are okay to use.
NOTE: You do not need a locking clip when using this
seat as a belt-positioning booster, even with older
vehicles.
Remove the locking clip when the vehicle seat belt is
not being used with the child restraint. A locking clip will
not fix all types of seat belt problems.
Refer to section D-4 to determine if your vehicle belts
require a locking clip.
Using A Locking Clip
Place Child Restraint in
Vehicle Forward-Facing
Thread vehicle lap belt
through the belt path as
shown. Buckle.
1.
3.
Tighten Vehicle Belt
Push down firmly on the
child restraint and pull
on the shoulder belt to
tighten.
2.
Attach Locking Clip
Thread both portions of the
vehicle belt onto the locking
clip, as close to the latch
plate as possible.
4.
1 in.
(2.5 cm)
5. Position Locking Clip
Position locking clip about
1 in. (2.5 cm) from vehicle
belt’s latch plate.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Safety 1st Summit 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Safety 1st Summit 65 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info