733426
9
Zoom out
Zoom in
Previous page
1/32
Next page
7
following jobs:
Clean or remove mold and mildew from
weathered decks, driveways, patios,
walkways, sidewalks, etc.
Remove dirt from various exterior vertical
surfaces such as house exteriors, siding,
fences, brick, concrete or stone walls, etc.
Wash boats, outdoor furniture, powered
or non-powered garden equipment,
gutters, window screens, grills, playground
equipment, etc.
SELECTING THE CORRECT NOZZLE FOR
THE JOB
Each of the nozzles has a different spray
pattern. Before starting any cleaning job,
determine the best nozzle for the job. Refer
to the table below for more information about
which nozzle to use.
Nozzle Application
Turbo
Spot cleaning of high, hard-to-
reach areas
Removing caked-on mud from
heavy construction, farm, or
lawn equipment
Cleaning overhead areas
15
o
For general purpose or large
surfaces
General cleaning of dirt, mud,
and grime
Cleaning roofs, gutters, and
downspouts
Removing light mildew stains
Removing algae and bacteria
build-up from pools
Rinsing surfaces in
preparation for painting
Soap
short
range
For gentle rinsing
Light cleaning and washing
Washing and rinsing of
painted surfaces and boats
Cleaning roofs, windows,
patios, and driveways
For short range detergent
Driveways, walkways, decks
and patios, vehicles, fences,
paint prep, patio furniture, and
lawn equipment
STARTING AND STOPPING THE HIGH
PRESSURE WASHER
NOTE: Do not run the pressure washer
without water supply connected and turned
on, as this may damage the high pressure
seals and decrease pump life. Completely
unwind the hose from its reel or coil and make
sure the hose is not being restricted by tires,
rocks, or any other objects that may lessen
or prevent water ow to the pressure washer.
Before starting the motor
Connect all hoses.
NOTE: Make sure the pressure washer’s
water intake screen is in place and
unclogged before connecting the garden
hose.
Turn on the garden hose then pull the trigger
to relieve air pressure; hold the trigger until
a steady stream of water appears.
NOTE: Make sure the faucet is turned on
fully and that there are no kinks or leaks in
the hose.
Starting the motor
With the product turned off, connect the
pressure washer to the power supply.
Press the on/off switch to turn on the motor.
Stopping the motor
Press the on/off switch to turn off the motor.
Pull trigger to release water pressure.
NOTE: The pressure washer may be on
and the system may have pressure even
when the pump and/or motor cannot be
heard running. Always use caution around
the pressure washer.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW190BL-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW190BL-G in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info