Manual Ryobi RPW190BL-G (page 10 of 32) (English)

733426

Zoom out

Zoom in

1/32

USING THE HIGH PRESSURE HOSE

WARNING

Injection hazard. Fully unwrap and

straighten high pressure hose prior to and

during each use and do not allow it to

become kinked. The high pressure hose

features an outer covering that provides

strength to the hose. If the outer covering

becomes damaged, stop using the hose

and replace it immediately. A kinked or

damaged hose can develop a high pressure

leak and result in a possible injection or

other serious personal injury.

To prevent damage to the outer covering,

follow these precautions:

■ Inspect the hose before every use.

■ Fully unwrap and straighten the hose

before use.

■ Do not allow the high-pressure hose to be

kinked.

■ Keep the hose away from hot surfaces and

sharp edges.

■ Do not pull the product by using the high-

pressure hose.

■ Do not allow the hose to be crushed or

wrapped around objects.

WASHING WITH DETERGENT

Use only detergents designed for high

pressure washers. Household detergents,

acids, alkalines, bleaches, solvents,

ammable material, or industrial grade

solutions can damage the pump. Many

detergents may require mixing prior to use.

Prepare the cleaning solution as instructed on

the solution bottle.

NOTE: Spray the detergent on a dry surface

using long, even, overlapping strokes. To

prevent streaking, do not allow detergent to

dry on the surface.

Before turning off the motor

■ Fill the soap tank with clean water.

■ Spray the clear water through the spray

wand until the tank is empty.

■ If any detergent remains in the spray,

repeat with a second tank of clean water.

■ Turn off the motor.

NOTE: Turning off the motor will not relieve

pressure in the system. Pull trigger to release

water pressure.

RINSING WITH THE HIGH PRESSURE

WASHER

■ Turn off the pressure washer and turn off

the water supply. Pull trigger to release

water pressure.

■ Engage the lock out on the trigger handle

by pushing up on the lock out until it clicks

into the slot.

■ Remove the soap nozzle and place it in the

nozzle storage area on the machine.

■ Select the right nozzle for the job. See the

chart shown earlier in the manual to select

the appropriate nozzle.

■ Start at the top of the area to be rinsed and

work down, overlapping the strokes.

POWER CORD STORAGE

When it is not in use, the power cord may be

coiled and suspended from the holder on the

handle.

To secure the power cord in place, use the

attached bungee cord.

MOVING THE PRESSURE WASHER

NOTE: Never lift or carry the product using

the handle and never place it in any position

other than upright on its wheels.

SYMBOLS ON THE PRODUCT

Warning

To reduce the risk of injury,

user must read and understand

operator’s manual before using

this product.

Wear full eye and ear protection.

Remove plug from the mains

immediately if cable is damaged

or cut.

Electrical shock hazard

The product is not suitable

for connection to the drinking

water mains without backow

preventer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW190BL-G in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ryobi RPW190BL-G Manual

Product: