733426

Ryobi RPW190BL-G Manual

7
Zoom out
Zoom in
Previous page
1/32
Next page
5
result of a clogged or dirty nozzle.
■ Turn off the pressure washer disconnect
from power supply, and turn off the water
supply. Pull trigger to release water
pressure.
■ Remove the nozzle from the spray wand.
■ To free any foreign materials clogging or
restricting the nozzle, blow out or remove
debris with a straightened paper clip or fine
needle (not included).
■ Using a garden hose, flush debris out of
nozzle by back flushing (running the water
through the nozzle backwards or from the
outside to the inside).
■ Reconnect the nozzle to the spray wand.
■ Turn on the water supply and start the
motor.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise during use and the
operator should pay special attention to avoid
the following:
■ injury caused by the high-pressure jet
– Avoid pointing the high-pressure jet to
people, animals, and to yourself.
■ injury caused by kickback
– Always hold the trigger handle or the
trigger wand firmly with your two hands.
■ injury caused by inhalation of aerosols
– Wear appropriate respiratory mask.
■ injury caused by exposure to noise
– Wear ear protection.
RISK REDUCTION
It has been reported that vibrations from
handheld tools may contribute to a condition
called Raynaud’s Syndrome. Symptoms may
include tingling, numbness, and blanching of
the ngers, usually apparent upon exposure
to cold. Hereditary factors, exposure to cold
and dampness, diet, smoking, and work
practices are all thought to contribute to the
development of these symptoms. There are
measures that can be taken by the operator to
possibly reduce the effects of vibration:
■ Keep your body warm in cold weather.
When operating the product, wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
■ After each period of operation, exercise to
increase blood circulation.
■ Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your physician.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
FEATURES
KNOW YOUR PRODUCT
See page 12.
The safe use of this product requires an
understanding of the information on the
product and in this operator’s manual as
well as a knowledge of the project you
are attempting. Before use of this product,
familiarize yourself with all operating features
and safety rules.
AUTOMATIC SOAP INJECTION SYSTEM
The safe use of this product requires an
understanding of the information on the
product and in this operator’s manual as
well as a knowledge of the project you
are attempting. Before use of this product,
familiarize yourself with all operating features
and safety rules.
ON/OFF SWITCH
This switch turns the pressure washerr on and
off.
POWER CORD STORAGE BRACKET
Store
the power cord on the convenient
storage bracket when the pressure washer is
not in use. Easily secure and release with the
attached bungee cord.
TRIGGER HANDLE
The trigger handle has a gripping surface that
provides added control of the spray wand and
helps reduce fatigue.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW190BL-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW190BL-G in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info