733426
6
Zoom out
Zoom in
Previous page
1/32
Next page
4
TRANSPORTATION AND STORAGE
CAUTION
Mind the weight of the product when
selecting the storage location and during
transportation to prevent accidents or
injuries.
Stop the product, disconnect from the
power supply, and allow the product to cool
down. Disconnect the product from the
water supply before storing or transporting.
Never place the product in any position
other than upright.
Clean all foreign materials from the product.
Store it in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
away from corrosive agents such as garden
chemicals and de-icing salts. Do not store
the product outdoors.
Remove water from all hoses and the
pump, and empty the detergent tank before
storing the product.
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
WARNING
Only store the product indoor. Storing in
an area with temperature below 0°C will
damage the product.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed only by
a qualied service technician. For service,
have the product serviced by an authorised
service centre only. When servicing, use
only original replacement parts.
Turn off the product, disconnect from the
power supply, allow the product to cool
down, and disconnect the product from the
water supply:
before cleaning the product
before maintaining the product
before replacing spare parts
You may make adjustments or repairs
described in this manual. For other repairs,
contact an authorised service centre.
Regularly inspect and maintain the high
pressure washer for safe operation. RYOBI
recommends inspecting the product every
3 months.
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
PUMP LUBRICATION
The pump on this unit is lubricated with a
sufcient amount of high grade lubricant for
the life of the unit under normal operating
conditions. Therefore, no further lubrication is
required.
PUMP MAINTENANACE
Routinely make a visual inspection of the
pump. If you notice any leaking of lubricant
around the pump seals, take the pressure
washer to an authorized service center for
repair.
There are no user serviceable parts to the
pressure washer pump. Any attempt to service
or alter the pump may damage the pressure
washer and void your product warranty.
NOZZLE MAINTENANCE
WARNING
NEVER remove nozzles without rst turning
off the motor, disconnecting from power
supply, relieving the water pressure in the
trigger handle, and locking the lock out on
the trigger handle. NEVER point the nozzle
at your face or at others. Failure to follow
these instructions could result in an eye
injury or other serious personal injury.
Excessive pump pressure (a pulsing sensation
felt while squeezing the trigger) may be the
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW190BL-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW190BL-G in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info