733426
4
Zoom out
Zoom in
Previous page
1/32
Next page
2
WARNING
Depending on the application, shielded
nozzles can be used for high-pressure
cleaning, which will reduce the emission
of hydrous aerosols. However, not all
applications allow the use of such a device.
If shielded nozzles are not applicable for the
protection against aerosols, a respiratory
mask of class FFP 2 or equivalent may
be needed, depending on the cleaning
environment.
Always stop the product when you leave it
unattended.
WARNING
High pressure jet is dangerous if misused.
Do not direct the jet to people, live electrical
equipment, or the product itself.
WARNING
To avoid a risk of explosion, do not spray
ammable liquids.
WARNING
Do not direct the jet against yourself or
others in order to clean clothes or footwear.
Do not use the product to clean electronic
devices, clothes, or footwear.
WARNING
High pressure hoses, ttings, and couplings
are important for the safety of the product.
Use only hoses, ttings, and couplings
recommended by the manufacturer.
CAUTION
The product must not be used on the
drinking water supply without a backow
preventer being installed that corresponds to
EN 12729 Type BA. Water owing through
a backow preventer is considered non-
drinkable. Always observe the regulations
of your local water utility company when
connecting the product to a water supply
line.
ELECTRICAL SAFETY WARNINGS
The plug must match the outlet. Never
modify the plug in any way. Unmodified
plugs and matching outlets reduces the
risk of electric shock.
WARNING
Do not use the product if the power cord
or other important parts, such as safety
devices, are damaged.
Do not use the product if the power cord
or other important parts, such as safety
devices, are damaged.
Check the power cord and the extension
cord for damage before each use. If
the power cord or the extension cord
is damaged, it must be replaced by the
manufacturer, its service agent, or similarly
qualified persons in order to avoid a hazard.
Before every use, examine the supply cord
for damage. If there are signs of damage,
it must be replaced by a qualified person
at an authorised service centre to avoid a
hazard.
Keep the power cord away from heat, oil,
and sharp edges.
Never touch the mains plug and the socket
with wet hands.
Do not use the product if the power cord
or other important parts, such as safety
devices, are damaged.
WARNING
Inadequate extension cords can be
dangerous. Use only an extension cord that
is suitable for outdoor use. Make sure that
the connection is dry and off the ground.
Use a cord wheel to keep the socket at least
60 mm above the ground.
The electric supply connection shall be
made by a qualified electrician and comply
with IEC 60364-1. It is recommended that
the electric supply to this product should
include either a residual current device
that will interrupt the supply if the leakage
current to earth exceeds 30 mA for 30 ms
or a device that will prove the earth circuit.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW190BL-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW190BL-G in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info