733431

Ryobi RPW150-G Manual

7
Zoom out
Zoom in
Previous page
1/28
Next page
5
TROUBLESHOOTING
Problem Possible causes Solution
Machine refuses to
start
Machine not plugged in Plug in machine.
Defective socket Try another socket.
Defective extension cable Try without the extension cable.
Fluctuating pressure Pump sucking air Check that hoses and connections are air tight.
Valves dirty, worn out or stuck Clean and replace or refer to local distributor .
Pump seals worn out Clean and replace or refer to local distributor.
Motor buzzes Low voltage or low temperature Activate the trigger of the spay handle.
Machine stops Incorrect mains voltage Check that the mains voltage corresponds to specication
on the model tag.
Thermal sensor activated Leave the washer for 15 minutes to cool down.
Nozzle partially blocked Clean the nozzle.
Machine pulsating Air in inlet hose/pump Allow the product to run with open trigger until regular
working pressure resumes.
Inadequate supply of mains
water
Check that the water supply corresponds to the specications
required (see model tag). Avoid using long, thin hoses.
Nozzle partially blocked Clean the nozzle.
Water lter blocked Clean the lter.
Hose kinked Straighten out hose.
Machine often starts
and stops by itself
Pump/spray handle is leaking Wait for the pump, hoses, or other accessory to thaw.
Machine starts, but
no water comes out
Pump/hoses or accessory frozen Wait for pump/hoses or accessory to thaw.
No water supply Connect the water inlet port to a water supply.
Water lter blocked Clean the lter.
Nozzle blocked Clean the nozzle.
… 7 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ryobi-rpw150-g

Reset search

  • My Ryobi RPW150-G will run at full pressure for about 10 seconds then stop, I release the trigger and engage again and the same thing happens.
    The in line filter is clean and there is ample water pressure.
    I have used my sons Ryobi cleaner and it works fine.
    Any ideas
    Brian Submitted on 21-11-2022 at 04:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW150-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW150-G in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info