489754
8
Zoom out
Zoom in
Previous page
1/64
Next page
8
USER MANUAL
GB
ruwido digital_3 Universal remote control
E. Identifying the 3 digit code
To identify the currently programmed 3 digit code, please follow the steps below.
1. Press the TV key and keep it pressed until the green LED ashes twice in quick
succession. (after approx. 3 seconds).
2. Within 10 seconds of seeing the 2 ashes above, enter the code 0 0 2, the green
LED ashes twice again.
3. To identify the currently saved code, press the number key “1” for the rst digit,
“2” for the second digit and “3” for the third digit. After each digit key has been
pressed, count the number of times the LED ashes.
Please note:
If the LED does not ash after you have pressed one of the above selection keys, the
respective code digit is 0.
Example:
Press key “1” for hundreds. The LED ashes three times. The rst digit of your
3-digit code is thus 3.
Press key “2” for tens. The LED ashes once. The second digit of your 3-digit code
is thus 1.
Press key “3” for units. The LED ashes six times. The third digit of your 3-digit
code is thus 6.
In this example, the code is thus 316.
We recommend that you write down the codes for your devices in the respective eld
in this manual so that they are available in case you need to re-program your ruwido
digital_3 remote control. The programmed codes retain in the memory even in case of
a battery change.
To identify the code for the STB and SAT mode please proceed as described above for
television sets, but instead of “TV” key use the “STB” or “SAT” key.
Write down the 3-digit codes here:
STB
SAT
TV
F. Reset
This functionality resets all settings to the factory settings.
Press the TV key and keep it pressed until the LED ashes twice in quick succession
(after approx. 3 seconds). Within 10 seconds of seeing the 2 ashes above, enter
the code 0 0 0, the LED ashes twice again. After this procedure the TV mode of the
ruwido digital_3 remote control is reset to the factory settings.
To reset the STB and SAT mode please proceed as described for resetting the TV
mode, but instead of “TV” key use the “STB” or “SAT” key.
BA V1 digital_3, 105x210 mm, 1c,8 8BA V1 digital_3, 105x210 mm, 1c,8 8 16.07.2008 19:14:5516.07.2008 19:14:55
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido Digital 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido Digital 3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info