Manual Ruwido Digital 3 (page 9 of 64) (English, German, Dutch, French, Italian, Spanish)

489754

Zoom out

Zoom in

1/64

USER MANUAL

ruwido digital_3 Universal remote control

G. Additional functions

Key and mode lock

After a successful programming (STB, SAT or TV mode) certain keys can be locked.

(Protection against faulty operation)

1. Press the TV key and keep it pressed until the green LED ﬂ ashes twice in quick

succession. (after approx. 3 seconds).

2. Within 10 seconds of seeing the 2 ﬂ ashes above, enter the code 0 9 9, the green

LED ﬂ ashes twice again.

3. Now you can deactivate single keys by pressing them. (The LED ﬂ ashes at each

key press, to conﬁ rm the input).

Please note: you have the possibility to lock the complete mode by pressing the mode

selection key (STB, SAT or TV).

4. After deactivating the last desired key press “TV” in order to complete the

procedure.

If no button is pressed within 10 seconds after the previous step, the remote control

returns to standard operating mode (the red LED ﬂ ashes up for two seconds).

To apply the single key lock for the STB and SAT mode please proceed as described

for the TV mode, but instead of “TV” key use the “STB” or “SAT” key.

Only the function „Reset“ (Code 0 0 0) cancels the single key lock.

Please note: After a reset, the code needs to be programmed again.

Following keys are excluded from the single key lock procedure:

• Standby • Numbers 0 to 9

• Cursor • P+ / P–

• V+ / V– • Mode keys (STB / SAT / TV)

Code lock

After a successful programming (STB, SAT or TV mode) each mode can be protected,

so that your remote control is not reprogrammed by another user by accident.

1. Press the TV key and keep it pressed until the green LED ﬂ ashes twice in quick

succession (after approx. 3 seconds).

2. Within 10 seconds of seeing the 2 ﬂ ashes above, enter the code 0 8 8, the green

LED ﬂ ashes twice again.

Now the TV mode is protected against reprogramming by accident.

To remove the code lock follow the same procedure (unlocking).

1. Press the TV key and keep it pressed until the green LED ﬂ ashes twice in quick

succession (after approx. 3 seconds).

2. Within 10 seconds of seeing the 2 ﬂ ashes above, enter the code 0 8 8, the green

LED ﬂ ashes twice again.

Now the TV mode can be programmed.

To apply the code lock for the STB and SAT mode please proceed as described for the

TV mode, but instead of “TV” key use the “STB” or “SAT” key.

Volume function#

In the SAT and STB mode you have also the possibility to control the volume of the

TV-set.

1. press the “SAT or STB” key for minimum 3 seconds until the LED ﬂ ashes twice

2. within ten seconds of seeing the 2 ﬂ ashes above, enter the code 0 0 4, the LED

ﬂ ashes twice again to acknowledge the function.

To deactivate this function enter the code 0 0 5.

BA V1 digital_3, 105x210 mm, 1c,9 9BA V1 digital_3, 105x210 mm, 1c,9 9 16.07.2008 19:14:5516.07.2008 19:14:55

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido Digital 3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ruwido Digital 3 Manual

Product: